Makefile

at91sam9m10g45ek_config \
at91sam9g45ekes_nandflash_config \
at91sam9g45ekes_dataflash_config \
at91sam9g45ekes_dataflash_cs0_config \
at91sam9g45ekes_config	:	unconfig
	@mkdir -p $(obj)include
		@if [ "$(findstring 9m10,$@)" ] ; then \
		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
	fi;
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91

pm9g45_config	:	unconfig
	@mkdir -p $(obj)include
	@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91

SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91

TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9G20_config \
TNY_A9260_NANDFLASH_config \
TNY_A9260_EEPROM_config \
TNY_A9260_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91

########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config	\
ap_config		\
ap966_config		\
ap922_config		\
ap922_XA10_config	\
ap7_config		\
ap720t_config		\
ap920t_config		\
ap926ejs_config		\
ap946es_config: unconfig
	@board/armltd/integrator/split_by_variant.sh ap $@

integratorcp_config	\
cp_config		\
cp920t_config		\
cp926ejs_config		\
cp946es_config		\
cp1136_config		\
cp966_config		\
cp922_config		\
cp922_XA10_config	\
cp1026_config: unconfig
	@board/armltd/integrator/split_by_variant.sh cp $@

nhk8815_config \
nhk8815_onenand_config:	unconfig
	@mkdir -p $(obj)include
	@ > $(obj)include/config.h
	@if [ "$(findstring _onenand, $@)" ] ; then \
		echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
	fi
	@$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik

xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))

omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
		echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
	else \
		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap

omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config :	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
		echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
	else \
		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap

spear300_config \
spear310_config \
spear320_config :	unconfig
	@$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear

spear600_config :	unconfig
	@$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear

SX1_stdout_serial_config \
SX1_config:		unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
	else \
		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1

# TRAB default configuration:	8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/trab
	@[ -z "$(findstring _bigram,$@)" ] || \
		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring _bigflash,$@)" ] || \
		{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
		}
	@[ -z "$(findstring _old,$@)" ] || \
		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
		}
	@$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0

tx25_config	: unconfig
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25

edb9301_config \
edb9302_config \
edb9302a_config \
edb9307_config \
edb9307a_config \
edb9312_config \
edb9315_config \
edb9315a_config: unconfig
	@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx

#########################################################################
# ARM supplied Versatile development boards
#########################################################################

versatile_config	\
versatileab_config	\
versatilepb_config :	unconfig
	@board/armltd/versatile/split_by_variant.sh $@

#########################################################################
## XScale Systems
#########################################################################

pdnb3_config \
scpu_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring scpu_,$@)" ] ; then \
		echo "#define CONFIG_SCPU"	>>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive

polaris_config \
trizepsiv_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring polaris,$@)" ] ; then \
		echo "#define CONFIG_POLARIS 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv

vpac270_nor_config \
vpac270_onenand_config	: unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring onenand,$@)" ] ; then \
		echo "#define CONFIG_ONENAND_U_BOOT" \
			>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270

#########################################################################
## ARM1136 Systems
#########################################################################

apollon_config		: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) $@ arm arm1136 apollon - omap24xx

imx31_phycore_eet_config \
imx31_phycore_config	: unconfig
	@mkdir -p $(obj)include
	@if [ -n "$(findstring _eet_,$@)" ]; then			\
		echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;	\
	fi
	@$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31

mx31pdk_config \
mx31pdk_nand_config	: unconfig
	@mkdir -p $(obj)include
	@if [ -n "$(findstring _nand_,$@)" ]; then					\
		echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;		\
	else										\
		echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;	\
		echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;	\
	fi
	@$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31

#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config	\
smdk6400_config	:	unconfig
	@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
	@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then			\
		echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
	else										\
		echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
	fi
	@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk

#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################

incaip_100MHz_config	\
incaip_133MHz_config	\
incaip_150MHz_config	\
incaip_config: unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _100MHz,$@)" ] || \
		echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
	@[ -z "$(findstring _133MHz,$@)" ] || \
		echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
	@[ -z "$(findstring _150MHz,$@)" ] || \
		echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a incaip mips mips incaip

vct_premium_config		\
vct_premium_small_config	\
vct_premium_onenand_config	\
vct_premium_onenand_small_config \
vct_platinum_config		\
vct_platinum_small_config	\
vct_platinum_onenand_config	\
vct_platinum_onenand_small_config \
vct_platinumavc_config		\
vct_platinumavc_small_config	\
vct_platinumavc_onenand_config	\
vct_platinumavc_onenand_small_config: unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _premium,$@)" ] || \
		echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
	@[ -z "$(findstring _platinum_,$@)" ] || \
		echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
	@[ -z "$(findstring _platinumavc,$@)" ] || \
		echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
	@[ -z "$(findstring _onenand,$@)" ] || \
		echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
	@[ -z "$(findstring _small,$@)" ] || \
		echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
	@$(MKCONFIG)  -n $@ -a vct mips mips vct micronas

#########################################################################
## MIPS32 AU1X00
#########################################################################

dbau1000_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1100_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1500_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1550_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1550_el_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

gth2_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
	@$(MKCONFIG) -a $@ mips mips gth2

pb1000_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
	@$(MKCONFIG) -a pb1x00 mips mips pb1x00

qemu_mips_config	: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
	@$(MKCONFIG) -a qemu-mips mips mips qemu-mips

#========================================================================
# Nios
#========================================================================

#########################################################################
## Nios-II
#########################################################################

# nios2 generic boards
NIOS2_GENERIC = nios2-generic

$(NIOS2_GENERIC:%=%_config) : unconfig
	@$(MKCONFIG) $@ nios2 nios2 nios2-generic altera

#========================================================================
# Blackfin
#========================================================================

bf527-ezkit-v2_config	: unconfig
	@$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
		bf527-ezkit blackfin blackfin bf527-ezkit

#========================================================================
# SH3 (SuperH)
#========================================================================

#########################################################################
## sh2 (Renesas SuperH)
#########################################################################
rsk7203_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas

#########################################################################
## sh3 (Renesas SuperH)
#########################################################################

mpr2_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh3 mpr2

ms7720se_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh3 ms7720se

#########################################################################
## sh4 (Renesas SuperH)
#########################################################################

MigoR_config :       unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 MigoR renesas

ms7750se_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 ms7750se

ms7722se_config :	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 ms7722se

r2dplus_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 r2dplus renesas

r7780mp_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 r7780mp renesas

sh7763rdp_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas

sh7785lcr_32bit_config \
sh7785lcr_config  :   unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/renesas/sh7785lcr
	@echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
	@if [ "$(findstring 32bit, $@)" ] ; then \
		echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x8ff80000" > \
			$(obj)board/renesas/sh7785lcr/config.tmp ; \
	fi
	@$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas

ap325rxa_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas

espt_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 espt

#########################################################################
#########################################################################

clean:
	@rm -f $(obj)examples/standalone/82559_eeprom			  \
	       $(obj)examples/standalone/atmel_df_pow2			  \
	       $(obj)examples/standalone/eepro100_eeprom		  \
	       $(obj)examples/standalone/hello_world			  \
	       $(obj)examples/standalone/interrupt			  \
	       $(obj)examples/standalone/mem_to_mem_idma2intr		  \
	       $(obj)examples/standalone/sched				  \
	       $(obj)examples/standalone/smc91111_eeprom		  \
	       $(obj)examples/standalone/test_burst			  \
	       $(obj)examples/standalone/timer
	@rm -f $(obj)examples/api/demo{,.bin}
	@rm -f $(obj)tools/bmp_logo	   $(obj)tools/easylogo/easylogo  \
	       $(obj)tools/env/{fw_printenv,fw_setenv}			  \
	       $(obj)tools/envcrc					  \
	       $(obj)tools/gdb/{astest,gdbcont,gdbsend}			  \
	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
	       $(obj)tools/mkimage	   $(obj)tools/mpc86x_clk	  \
	       $(obj)tools/ncb		   $(obj)tools/ubsha1
	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
	       $(obj)board/matrix_vision/*/bootscript.img		  \
	       $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}	  \
	       $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
	       $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
	       $(obj)u-boot.lds						  \
	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
	@rm -f $(obj)include/bmp_logo.h
	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
	@rm -f $(ONENAND_BIN)
	@rm -f $(obj)onenand_ipl/u-boot.lds
	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
	@find $(OBJTREE) -type f \
		\( -name 'core' -o -name '*.bak' -o -name '*~' \
		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \
		| xargs rm -f

clobber:	clean
	@find $(OBJTREE) -type f \( -name '*.depend' \
		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
		-print0 \
		| xargs -0 rm -f
	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
		$(obj)cscope.* $(obj)*.*~
	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
	@rm -f $(obj)u-boot.kwb
	@rm -f $(obj)u-boot.imx
	@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
	@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f

ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean:	clobber unconfig
else
mrproper \
distclean:	clobber unconfig
	rm -rf $(obj)*
endif

backup:
	F=`basename $(TOPDIR)` ; cd .. ; \
	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F

#########################################################################