Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Oliver Weber <almoeli@gmx.de>

Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
This patch fixes the problem.

Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>

Signed-off-by: Larry Johnson <lrj@acm.org>

Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
"i2c sdram" command.  This patch provides correct alternative
interpretations when DDR2 memory is detected.

Signed-off-by: Larry Johnson <lrj@acm.org>

With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>

(needed for M5475EVB)

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
isn't defined. This patch fix this.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

There were some size and unsigned problems.
Also add support for "ll" size modifier in format string like glibc

Signed-off-by: James Yang <James.Yang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>

(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".

(2) Use conditional Makefile.o.

Signed-off-by: Larry Johnson <lrj@acm.org>

The TK885D board uses a TQM885D module from TQ, this port adds an
own configuration file and adds a last_stage_init() method to
configure the two PHYs, depending on the phy_auto_nego environment
variable.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

main.c: In function 'readline_into_buffer':
main.c:927: warning: unused variable 'p_buf'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>

Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
are not displayed correctly. This is an attempt to fix
this issue. Also add carriage return handling.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>

Clear possible errors in MCSR resulting from data-eye-search.
If not done, then we could get an interrupt later on when
exceptions are enabled.

Signed-off-by: Stefan Roese <sr@denx.de>

Rework Lime support for lwmon5 using new video driver

Signed-off-by: Anatolij Gustschin <agust@denx.de>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

The DDR doesn't work on the 266MHz data rate,
the patch fix the bug.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Format the code, make it more readable

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>