Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

 - jump to real flash location after reset before turning off flash mirror
 - fix timer system to use HZ == 1000, remove broken interrupt-based code

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>

This patch fixes following compile warning:

---8<---
macb.c: In function 'macb_write_hwaddr':
macb.c:525:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>

This patch removes the warning

---8<---
at91_emac.c: In function 'at91emac_write_hwaddr':
at91_emac.c:487:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>

Signed-off-by: Eric Bénard <eric@eukrea.com>

Signed-off-by: Eric Bénard <eric@eukrea.com>

Signed-off-by: Eric Bénard <eric@eukrea.com>

atmel rework changed define names which broke this file

Signed-off-by: Eric Bénard <eric@eukrea.com>

The rework effort for ATMEL (AT91/AVR32) accidentially broke build of
this driver. Fix this to make it build again. However this driver should
be reworked as soon as possible!

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Fix EMK TOP9000 board to build again:
- changes required due to ATMEL rework

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Make ATMEL's at91sam9260/9g20/9xe-ek boards build again

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
 * Fix: timer.c compile error io.h not found with arm/at91rm9200
 * update arm920t/at91 to ATMEL_xxx name scheme
 * update arm920t/at91 soc lib
 * update at91_emac driver

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Tested-by: Andreas Bießmann <andreas.devel@gmail.com>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Remove obsolete config.mk from QONG board.

Signed-off-by: Stefano Babic <sbabic@denx.de>

Provide SDRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

DRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Provide SDRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Provide SDRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Provide SDRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Provide SDRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

The clock-frequency property in an audio codec's device tree node is set to
the input clock frequency for that codec.  On the Freescale P1022DS board,
the input clock is enabled only if the hwconfig 'audclk' option is set.
Therefore, the property should only be set in the device tree if the clock
is actually enabled.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

* 'master' of git://git.denx.de/u-boot-arm:
  SMDK6400: fix the compiler error
  imx27lite: Remove local config.mk
  mx31ads: Fix environment location on flash
  imx31_litekit: Remove local config.mk
  mx31litekit: Fix boot with the new relocation scheme.
  mx31ads: Use the new relocation scheme

This patch adds _end for fix following compiler error

arch/arm/cpu/arm1176/start.o: In function `_end_ofs':
arch/arm/cpu/arm1176/start.S:61: undefined reference to `_end'

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Local board config.mk should be avoided.

Place CONFIG_SYS_TEXT_BASE definition into the board config file instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>