Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
TB5200 and TB5200_B to fixup the /memory node with the memory values
detected by U-Boot.

Signed-off-by: Martin Krause <martin.krause@tqs.de>

Conflicts:

	include/asm-arm/arch-imx/imx-regs.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
TB5200 and TB5200_B to fixup the /memory node with the memory values
detected by U-Boot.

Signed-off-by: Martin Krause <martin.krause@tqs.de>

This patch fixes a bug in the SDRAM initialization code for the
TQM5200. The hi_addr bit is now set correctly. Without this patch
the hi_addr bit is always set to 1, if the second SDRAM bank is
not populated.

For other MPC5200 boards a correspondig patch has already been applied
some time ago, see commit a6310928.

Signed-off-by: Martin Krause <martin.krause@tqs.de>
--
Forget the first patch please. I confused flash with SDRAM in
the comment ...

"pointer targets in assignment differ in signedness"

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Sync register definitions with linux

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

- actua1:
	actux1.c: In function 'checkboard':
	actux1.c:92: warning: unused variable 'revision'

- actua2:
	actux2.c: In function 'checkboard':
	actux2.c:100: warning: unused variable 's'
	actux2.c:99: warning: unused variable 'revision'
	actux2.c: In function 'reset_phy':
	actux2.c:130: warning: unused variable 'i'

- actua3:
	actux3.c: In function 'checkboard':
	actux3.c:114: warning: unused variable 'revision'

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The previous patch was lacking of i386, microblaze, nios and nios2. This
patch tries to fix them.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

Don't include testdram() on NAND-booting target acadia_nand. This saves
a few bytes and makes the target build clean again.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Sync registers definition with linux

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

- actua1:
	actux1.c: In function 'checkboard':
	actux1.c:92: warning: unused variable 'revision'

- actua2:
	actux2.c: In function 'checkboard':
	actux2.c:100: warning: unused variable 's'
	actux2.c:99: warning: unused variable 'revision'
	actux2.c: In function 'reset_phy':
	actux2.c:130: warning: unused variable 'i'

- actua3:
	actux3.c: In function 'checkboard':
	actux3.c:114: warning: unused variable 'revision'

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

----------------------------------------------------------------
Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]

Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
32bit targets.

GCC can be made to warn about usage of long long types with ISO C90
(-ansi), but only with -pedantic.  You can write this in a way that even
then it doesn't cause warnings, namely by:

#ifdef __GNUC__
__extension__ typedef __signed__ long long __s64;
__extension__ typedef unsigned long long __u64;
#endif

The __extension__ keyword in front of this switches off any pedantic
warnings for this expression.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----------------------------------------------------------------

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

This will reduce the build time.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

This will reduce the build time.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

This reduces the build time by ~10%. Here's the gth2_config example.

        BEFORE       AFTER
real    0m31.441s    0m27.833s
user    0m24.766s    0m23.045s
sys     0m10.425s    0m7.468s

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
the define2mk.sed script was identified as the source of the link
failure on FreeBSD. The problem is that sed(1) does not always support
the '+' operator. It isn't on FreeBSD. The attach patch implements the
equivalent, using the '*' operator instead and should work everywhere.

Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>

The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
final traces of long-deprecated "ramdisk" kernel parm") makes these
changes neccessary.

Signed-off-by: Detlev Zundel <dzu@denx.de>

When the LM75 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
256 C too high.  This patch fixes the problem.

Signed-off-by: Larry Johnson <lrj@acm.org>

Signed-off-by: Heiko Schocher <hs@denx.de>

Rename the "scc" node in "ethernet" for the mgsuvd board.

Signed-off-by: Heiko Schocher <hs@denx.de>

Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
causing it to reboot the board if U-Boot does a long busy-wait with
udelay(). Thus, for these boards we have to restart WD more
frequently.

This patch splits the busy-wait udelay() into smaller, predefined,
intervals, so that the watchdog timer may be resetted with the
configurable (CONFIG_WD_PERIOD) interval.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

Adds configuration option for ATI Radeon 9200 card
support to sequoia config file. If CONFIG_VIDEO
is enabled, TEXT_BASE should be changed to 0xFFF80000.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

A few duplicate of the ARRAY_SIZE macro sneaked in since we put
the define in common.h.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS.  However newer boards are capable of
mapping more memory (for example 85xx is capable of doing up to 2G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
those .mk files can have make if statements based on the current config.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

If any of the steps for generating autoconf.mk fail currently, they go
unnoticed.  To fix, we can simply add 'set -e' to the long list of commands.
This is simpler and more robust than placing '|| exit $$?' after every line.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

By adding VERSION_FILE to the PHONY targets the script
/tools/setlocalversion is always called and version_autogenerated.h
is replaced only if the script find a modified source file.

Signed-off-by: Stefano Babic <sbabic@denx.de>

It disables the current map first

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

- Fix flash_init call when CFG_NO_FLASH is used
- Remove no more needed flash.c for qemu-mips

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Michael Hennerich added support for outputting an image in RGB format rather
than forcing YUYV all the time.  This makes obvious sense if the display you
have takes RGB input rather than YUYV.

Rather than hack in support for options, I've converted it to use getopt and
cleaned up the argument parsing in the process.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
then change into the board directory and try and create it.  This allows you
to generate the linker script on the fly based upon board defines (like the
Blackfin boards do).

There should be no regressions due to this change as the normal case is to
already have a u-boot.lds file.  If that's the case, then there's nothing to
generate, and so make will always exit.  The fix here is that if the linker
script does not exist, the implicit rules take over and attempt to guess how
to generate the file.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>