This patch adds support for the display controller in
the MB86R0x SoCs.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Acked-by: Anatolij Gustschin <agust@denx.de>

Signed-off-by: Matthias Weisser <weisserm@arcor.de>

Turn all ORION5X_DEF{ADR,SZ}_xxx macros into ORION5X_{ADR,SZ}_xxx
and allow defining them from board code to override defaults. This
is particularly useful for defining board-specific FLASH address
and size in board header file rather than having to tweak orion5x
code.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

get_timer_masked() should return current timestamp,
not current ticks from hardware register.

Tested on one custom board with NAND flash.
Without this patch, NAND write always TIMEOUT
because get_timer(0) return a big value.

This patch applies for u-boot-2010.06

Signed-off-by: Li Haibo <hbli@sinocastel.com>

Remove warning for missing " at the end of line 136

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Simply trying to include a basic header file like stdlib.h on OS X 10.5
and then building with -traditional-cpp fails with lots of errors like:
In file included from /usr/include/stdlib.h:63,
                 from test.c:3:
/usr/include/available.h:85: error: stray '#' in program
/usr/include/available.h:85: error: syntax error before numeric constant
/usr/include/available.h:86: error: stray '#' in program

In the past, I hadn't noticed because the old logic for these flags were
restricted to Darwin running on PowerPC systems while I'm running on an
Intel system.  But after some recent clean ups and changes, the flag was
being applied to all Darwin systems and my host tools broke.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Original bug description from Feng (fdt_resize() bug caused "WARNING:
could not set linux, initrd-start FDT_ERR_NOSPACE."):

What I got is an error: "WARNING: could not set linux,initrd-start
FDT_ERR_NOSPACE." after loading Device Tree blob. This in turn caused
linux to miss init part.

After some digging, I found out the reason for this error, it is caused
by fdt_resize().

FDT blob got resized after filling in all board specific information of
PowerPC. (in boot_body_linux()). It reduced blob size with only extra
space for two fdt_reserve_entry, one for fdt itself, and one for initrd.
Then it's aligned to a 0x1000 page boundary. However, later in
fdt_initrd(), it could add two more properties, initrd-start AND
initrd-end, each one needs at least two fdt_reserve_entry sizes done by
_fdt_add_property() (name and value). Thus, the two fdt_reserve_entry
extra space is not sufficient.

So for some specific fdt size which is just under the page boundary
after resizing, this will cause an error of FDT_ERR_NOSPACE in
fdt_initrd() when setting those two properties, and failed to pass
initrd information to linux.

My fix is in fdt_resize(), leave at least 4 fdt_reserve_entry for
initrd. So instead of 2*sizeof(struct fdt_reserve_entry) for
actual_totalsize, use 5*sizeof(struc fdt_reserve_entry).

Stefan: I got this same error on katmai, when trying to boot with
initrd (run flash_self). This patch fixes this issue.

Signed-off-by: Feng Wang <fwang02@harris.com>
Tested-by: Stefan Roese <sr@denx.de>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>

removed a variable that was not used

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Most of the files have U_BOOT_CMD on a separate line,
but a few didn't and had the first line on the same line
as U_BOOT_CMD.

This changes these files by adding a line break and a tab

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

removed the command name from the help message as it is already printed.
for cmd_mmc also rewrote the message a little bit

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

The invalidation of the old environment instance did not work for flashes
supporting hardware locking.  Now we unlock/lock around this update also.

Signed-off-by: Detlev Zundel <dzu@denx.de>

If a flash is unable to be detected, and then someone calls flash_protect
on it (like the common code does in flash_init), the flash_protect logic
will dereference a NULL pointer.

Since flash_protect already does sanity checking on the info structs, add
a NULL pointer check in there.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Fix error handling in getenv_f() when the user provided buffer is too
short to hold the variable name; make sure to truncate and
NUL-terminate without overwriting the buffer limits.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Applying a little creative format string allows us to shrink the initial
data read & display loop by only calling printf once.  Re-using the local
data buffer to generate the string we want to display then allows us to
output everything with just one printf call instead of multiple calls to
the putc function.

The local stack buffer needs increasing by 1 byte, but the resulting code
shrink and speed up is worth it I think.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

No need to output spaces 1 char at a time in a loop when the printf code
can do the same thing with the right format string.  This shrinks things
and gives a nice speed up when killing off lines more than a byte or two
as printf will send out the buffer in one big chunk.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Heiko Schocher <hs@denx.de>

- nfs-options removed
- hda->sda changed
- mtd parts added
- loadaddress changed
- cmd-line length increased
- lcd stuff removed
- code cleanup (use I/O accessors etc.)

Signed-off-by: Klaus Heydeck <heydeck@kieback-peter.de>

Platforms with flat device tree support can use a bootmap to relocate
the fdt_blob. This is not a must. That's why the relocation function
boot_relocate_fdt() should be use only if CONFIG_OF_LIBFDT was defined
together with CONFIG_SYS_BOOTMAPSZ (see common/cmd_bootm.c).

On MicroBlaze platforms there is no need to use a bootmap to relocate
a fdt blob. So we need a more precise focus on the compilation and usage
of boot_relocate_fdt().

In general it is valid to exclude the function boot_relocate_fdt() if
the bootmap size CONFIG_SYS_BOOTMAPSZ is not defined.

Signed-off-by: Stephan Linz <linz@li-pro.net>

Some Linux distributions include the "mkimage" as a package.
This commit provides a manual page for mkimage.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Added documentation for FIT images and examples.
Moved to doc/ directory.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This patch enables mvsata driver and related filesystem support.
The patch is tested for ide reset and ext2ls operation for a disk drive connected on SATA port0.
This patch depends upon the patche-series http://lists.denx.de/pipermail/u-boot/2010-August/074908.html



Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Added MVSATAC definitions to Kirkwood.
Added support for Kirkwood in cmd_ide.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Add mvsata_ide and cmd_ide configuration in edminiv2 config

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

Add MVSATAHC definitions to orion5x.
Add support for orion5x in cmd_ide.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

This driver only provides initialization code; actual driving
is done by cmd_ide.c using the ATA compatibility mode of the
Marvell SATAHC controller.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

CONFIG_IDE_SWAP_IO

This configuration option replaces a complex conditional
in cmd_ide.c with an explicit define to be added to SoC or
board configs.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

If both LZMA and LZO compressions are used there is a compile error
in cmd_bootm.c

Signed-off-by: Matthias Weisser <weisserm@arcor.de>

Doubly-indirect block numbers are compared against the first-level
indirect block when checking for a cached copy.  This is causing the
doubly-indirect block to be re-read each time it is accessed.
Repairing this reduces load time for a 70M file from 72 seconds
to 38 seconds.

Signed-off-by: Aaron Pace <Aaron.Pace@alcatel-lucent.com>

These functions are undefined on ARM when using __io. These are the commonly
used versions and can be redefined.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

If the user sets bootm_low and does not set bootm_size, u-boot will
report the memory node in the flat device tree incorrectly. Instead
of reporting the remaining size of memory, it will report the total
available memory which is incorrect.

Specifically this fixes the situation when booting a relocatable
kernel and the memory is reported as an offset and size in the
device tree, and the size needs to be adjusted accordingly.

Signed-off-by: Matthew McClintock <msm@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>