This is consistent with nios2-linux. And resolved the warning,

cmd_nvedit.c: In function `do_env_export':
cmd_nvedit.c:660: warning: size_t format, ssize_t arg (arg 3)

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

Added this for mmc_spi driver. Though altera spi core does not
support programmable speed. It is fixed when configured in
sopc-builder.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

Use SPMR instead of HRCWL when calculating clocks as HCRWL
may be changed and the CPU will not pick up all changes
until there is a POR. u-boot will think SPMF has changed and get
the clocks wrong.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch fix a problem for the pcie enumeration when the mpc83xx
pcie controller is connected with switch or we use both of the two
pcie controller.

Signed-off-by: Leo Liu <liucai.lfn@gmail.com>

fix codingstyle and compiler warning: 'pcie_priv' defined but not used

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

While debugging some USB stuff, I've first missed that there are actually
two defines necessary to get usefull output. The one needed to get debug output
for the communication with HUBs was burried somewhere deep inside the code.

Change that so that a #define DEBUG is enough while still leaving the possibility
to reduce unwanted debug output.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>

I currently don't know if the error could have other consequences
than a wrong output when turning debug on.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>

The P1013 is a single core version of P1022 and thus should use the
p1022_serdes.c code.  It was acciently pointing to p1013_serdes.c which
doesn't exist.

Reported-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Using hwconfig to turn on/off ECC, without re-compiling.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Workaround for the following errata:
DDR111 - MCKE signal may not function correctly at assertion of HRESET
DDR134 - The automatic CAS-to-Preamble feature of the DDR controller can
         calibrate to incorrect values

These two workarounds must be implemented together because they touch
common registers.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Use unique erratum number instead of platform number.
Enable command that reports errata on MPC8572DS.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Also removed duplicate CONFIG_CMD_IRQ define.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This polling loop is not required normally, unless specifically stated in
workaround.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 4, 8,
and 12. Program one more than the desired value: 4 -> 5, 8 -> 9, 12 -> 13.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

When redundand environments are used the serial needs
to get increased, otherwise the old one will still be used.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

After years of unsuccessful research I've finally shamelessly stolen other
peoples intellectual properties to present the all-new and world-changing
updated version command:
-
U-Boot>> version

U-Boot 2010.12-00014-g7435056-dirty (Jan 18 2011 - 23:19:38)
MyBoard
gcc (GCC) 0.42 (Distro foobar)
GNU ld (GNU Binutils) 0.314159265
-
May the toolchain bugs rest in peace.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.

This patch supports the following functions:
 - 256MB DDR3-SDRAM
 - SPI ROM
 - Ethernet

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

SH7757 has SPI module. This patch supports it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Some CPU needs cache handling. So this patch add the config of
CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>