Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

Implement watchodg-aware variants of hash calculation functions:
- crc32_wd()
- md5_wd()
- sha1_csum_wd()
The above functions calculate the hash of the input buffer in chunks,
triggering the watchdog after processing each chunk. The chunk size
is given as a function call parameter.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

No functional change.

This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
Then I re-created from scratch, and changed more lines than the original.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

Bus and phys address are not always the same

Signed-off-by: Vlad Lungu <vlad@comsys.ro>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Vlad Lungu <vlad@comsys.ro>

Correct the Linux architecture number for i.MX31 Litekit and ADS boards.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

Use symbolic names instead of hard coded addresses for Litekit membases.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

in commit fad63407 "make show_boot_progress () weak."
show_boot_progress is supposed to be declared as weak but declared as
inline instead.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

As suggested by Wolfgang Denk:
- image printing functions:
  - remove wrappers
  - remove indentation prefix from functions' signatures
- merge getenv_verify and getenv_autostart into one parametrized function

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

Update MX31ADS default environment to better match the flash layout and
the memory map, support SPI and RTC.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

eg. because of rounding error we can get 799Mhz instead of 800Mhz.

Introduced DIV_ROUND_UP and roundup taken from linux kernel.

Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>

pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Markus Klotzbuecher <mk@denx.de>

Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Signed-off-by: Detlev Zundel <dzu@denx.de>

The envcrc.c does sizeof(unsigned long) when calculating the crc, but
this is done with the build toolchain instead of the target tool
chain, so if the build is a 64bit system but the target is 32bits,
the size will obviously be wrong. This converts all unsigned long
stuff related to crc32 to uint32_t types. Compile tested only: output
of ./tools/envcrc when run on a 32bit build system matches that of a
64bit build system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch fixes the Canyonlands and Glacier default environment to better
fit to the arch/powerpc device-tree kernels. The variables dealing with
arch/ppc booting are removed, since these boards are supported only in
arch/powerpc. Glacier uses the same config file as Canyonlands.

Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>

This patch removes the temporary 'test' strapping option
of the sbe command. The '667' strapping option now uses
a PLB/PCI divider of 3.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

The APC405 board support has been migrated to use the common
CFI flash driver.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

- enable esd's auto_update mechanism
- support alternative flash layout on rev. 1.8 boards
- update default environment
- use common CFI flash driver
- coding style cleanup

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

- enable esd's auto_update mechanism
- fix LCD support on latest hardware revision (uses other LCD controller)
- support alternative flash layout on rev. 1.8 boards
- coding style cleanup

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

- Coding style cleanup (long lines)
- improve handling of protected flash regions
- remove dead code

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

- Coding style cleanup (long lines)
- Add s1d13505 support
- Make some functions return a result code instead of void

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

dcache_enable() was missing for 440 and the patch
017e9b79 ["allow ports to override bootelf
"] behavior uses this function.

Note: Currently the cache handling functions like
d/icache_disable/enable() are NOP's on 440. This may be changed in the
future.

Signed-off-by: Stefan Roese <sr@denx.de>

This patch adds two missing free()s.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch assigns the correct EBC clock for 405GP(r) CPUs
to PPC4xx_SYS_INFO structure. Without this patch U-Boot
uses an uninitialized EBC clock in its startup message.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

The cpu-release-addr is defined as always being a 64-bit quanity regardless
if we are running on a 32-bit or 64-bit machine.

Some 85xx chips use CCB as the base clock for the I2C.  Some use CCB/2, and
some use CCB/3.  There is no pattern that can be used to determine which
chips use which frequency, so the only way to determine is to look up the
actual SOC designation and use the right value for that SOC.

Update immap_85xx.h to include the GUTS PORDEVSR2 register.

Signed-off-by: Timur Tabi <timur@freescale.com>

    Change env_get_char from a global function ptr to a function.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This patch allows U-Boot to use buffered writes to the Spansion NOR
flash installed on this board, and eliminates long delays in network
transfers after the board startup.

Also modify flash layout to embed main and redundant environment
blocks in the U-Boot image.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>