The rest of the MAINTAINERS file appears to be sorted
almost-alphabetically, but entries for the newly added AVR32 boards were
added somewhat randomly. This patch sorts the list alphabetically again.

Also update my e-mail address. The old one still works, but it may not
work forever.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Conflicts:

	MAKEALL
	Makefile

The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
8MByte FLASH and 128KByte FRAM.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Conflicts:

	MAINTAINERS
	MAKEALL
	Makefile

This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The current lcd_display_bitmap() function does not work properly
for the Atmel LCD controller.

2 fixes need to be done:-

(a) when setting the colour map, use the lcd_setcolreg() function
    as provided by the Atmel driver
(b) the data is never actually written to the lcd framebuffer !!

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Implement usec2ticks() which is used by fsl_i2c.c in
lib_m68k/time.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

TASREG is ColdFire platform, the include ppc4xx.h in
board/esd/common/flash.c causes conflict.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Rename OBJ to COBJ in board/platform/Makefile

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Rename int mii_init(void) to void mii_init(void) for idmr
ColdFire platform

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:

  If this option is set, additionally to standard BMP
  images, gzipped BMP images can be displayed via the
  splashscreen support or the bmp command.

However, the splashscreen function *only* supports standard BMP images.

This patch adds the documented gzip support.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

The Atmel lcd controller is used on Atmel's AT91 (little endian) and
AVR32 (big endian) platforms.

As such, the controller can handle both big and little endian memory.

This patch fixes the driver for the AVR32 platform.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>

U-Boot allows for configurable prompt strings using the
CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
the assumption was that any such user defined problts would contain
exactly one "%d" format specifier. But some boards did not.

To allow for flexible boot prompts without adding too complex code we
now allow to specify the whole list of printf() arguments in the user
definition. This is powerful, but requires a responsible user who
really understands what he is doing, as he needs to know for exanple
which variables are available in the respective context.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Avoid "integer constant is too large for 'long' type" warnings.
And simplify the code.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

This patch adds pci_clk field to the global_data structure for the
processors which have CPM2 module in case the CONFIG_PCI is defined.

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

* Move to using absolute addressing always.  Makes the scripts a bit more
  portable and common
* Moved .bss after the end of the image.  These allows us to have more
  room in the resulting binary image for code and data.
* Removed .text object files that aren't really needed
* Make sure _end is 4-byte aligned as the .bss init code expects this.
  (Its possible that the end of .bss isn't 4-byte aligned)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The origional code was using on odd reference to get to the first
real element in av_[].  The first two elements of the array are
not used for actual bins, but for house keeping.  If we are more
explicit about how use the first few elements we can get rid of the
warnings:

dlmalloc.c: In function 'malloc_extend_top':
dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
...

The logic of how this code came to be is:
	bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ

SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
	bin_at(0) = &(av_[0])

Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Stefan Roese <sr@denx.de>

A recent patch used '#if (CONFIG_CMD_USB)' instead of
'#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
common/bootm.c compile again.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Markus Klotzbuecher <mk@denx.de>

There are no I2C devices on this board.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Tried fixing NAND support for the at91rm9200dk board; untested.
Disabled NAND support in the csb637 board config file.

Signed-off-by: Wolfgang Denk <wd@denx.de>