- Jun 01, 2011
-
-
Enric Balletbo i Serra authored
At least on ARM the ipaddr is only set in board_init_r function. The problem is if ipaddr is not defined in environment importing another environment defined don't update the ipaddr value. For example, suppose we've a default environment without net variables defined and we want to import an uEnv.txt environment from SD-card like this: ipaddr=192.168.2.240 netmask=255.255.255.0 gatewayip=192.168.2.1 serverip=192.168.2.114 Then if you try boot from NFS results in: Importing environment from mmc ... Running uenvcmd ... smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC ac:de:48:00:00:00 *** ERROR: `ipaddr' not set The ipaddr at this point is NULL beacause is only set at board_init_r function. This patch updates the ipaddr value if the environment has changed. Signed-off-by:
Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by:
Mike Frysinger <vapier@gentoo.org>
-
Wolfgang Denk authored
* 'master' of /home/wd/git/u-boot/custodians: sh: sh7785lcr: Update BSC of USB area
-
git://git.denx.de/u-boot-shWolfgang Denk authored
* 'master' of git://git.denx.de/u-boot-sh: sh: sh7785lcr: Update BSC of USB area
-
Wolfgang Denk authored
* 'master' of /home/wd/git/u-boot/custodians: SMDKV310: Fix incorrect conditional compilation for MIU linear mapping SMDKV310: CPU fequency and mmc_pre_ratio modified armv7: Add support for ST-Ericsson U8500 href platform I2C: Add driver for ST-Ericsson U8500 i2c armv7: Add ST-Ericsson u8500 arch Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT ARMV7: Vexpress: Add missing MMC header arm/km: update mgcoge3un board support mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE arm/km: rename mgcoge2un to mgcoge3un arm/km: add second serial interface for kirkwood arm/km: disable ls (through jffs2 support) arm/km: introduce bootcount env variable and clean km_arm arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h ARMV7: MMC SPL Boot support for SMDKV310 board ARMV7: Add support for Samsung SMDKV310 Board S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1) S5P: add set_mmc_clk for external clock control S5PC2XX: Support the cpu revision S5P:SROM config code moved to s5p-common directory Add _end for the end of u-boot image for SMDK6400 MMC S5P: Fix typo S5P: GPIO Macro Values Corrected. SMDK2410: various cleanup/code style fixes SMDK2410: use the CFI driver (and remove the old one) SMDK2410: remove unneeded config.mk SMDK2410: activate ARM relocation feature BeagleBoard: fixed typo in typecast mvsata: issue hard reset on initialization VCMA9: use ARM relocation feature to fix build error MX31: drop warnings due to missing prototype for mxc_watchdog_reset() MX5: drop config.mk from efikamx board MX31: Make get_reset_cause() static and drop unreachable code MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. MX53: Handle silicon revision 2.1 case mx5: board: code clean up for checkboard code MX51: vision2: Fix build for vision2 board. MX51: vision: Let video mode struct be independant of watchdog. MX53: Add initial support for MX53SMD board. MX53: support for freescale MX53LOCO board mx5: Fix CONFIG_OF_LIBFDT redefined warning mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition mx31pdk: Clean up mx31pdk.h file
-
git://git.denx.de/u-boot-armWolfgang Denk authored
* 'master' of git://git.denx.de/u-boot-arm: SMDKV310: Fix incorrect conditional compilation for MIU linear mapping SMDKV310: CPU fequency and mmc_pre_ratio modified armv7: Add support for ST-Ericsson U8500 href platform I2C: Add driver for ST-Ericsson U8500 i2c armv7: Add ST-Ericsson u8500 arch Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT ARMV7: Vexpress: Add missing MMC header arm/km: update mgcoge3un board support mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE arm/km: rename mgcoge2un to mgcoge3un arm/km: add second serial interface for kirkwood arm/km: disable ls (through jffs2 support) arm/km: introduce bootcount env variable and clean km_arm arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h ARMV7: MMC SPL Boot support for SMDKV310 board ARMV7: Add support for Samsung SMDKV310 Board S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1) S5P: add set_mmc_clk for external clock control S5PC2XX: Support the cpu revision S5P:SROM config code moved to s5p-common directory Add _end for the end of u-boot image for SMDK6400 MMC S5P: Fix typo S5P: GPIO Macro Values Corrected. SMDK2410: various cleanup/code style fixes SMDK2410: use the CFI driver (and remove the old one) SMDK2410: remove unneeded config.mk SMDK2410: activate ARM relocation feature BeagleBoard: fixed typo in typecast mvsata: issue hard reset on initialization VCMA9: use ARM relocation feature to fix build error MX31: drop warnings due to missing prototype for mxc_watchdog_reset() MX5: drop config.mk from efikamx board MX31: Make get_reset_cause() static and drop unreachable code MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. MX53: Handle silicon revision 2.1 case mx5: board: code clean up for checkboard code MX51: vision2: Fix build for vision2 board. MX51: vision: Let video mode struct be independant of watchdog. MX53: Add initial support for MX53SMD board. MX53: support for freescale MX53LOCO board mx5: Fix CONFIG_OF_LIBFDT redefined warning mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition mx31pdk: Clean up mx31pdk.h file
-
Wolfgang Denk authored
* 'master' of /home/wd/git/u-boot/custodians: powerpc/fsl_pci: Fix device tree fixups for newer platforms
-
git://git.denx.de/u-boot-mpc85xxWolfgang Denk authored
* 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/fsl_pci: Fix device tree fixups for newer platforms
-
Wolfgang Denk authored
* 'master' of /home/wd/git/u-boot/custodians: cmd_nand: fix help of nand erase subcommand env_nand: zero-initialize variable nand_erase_options
-
Marek Vasut authored
Drop wepep250 board from MAINTAINERS and add all these three boards to doc/README.scrapyard Signed-off-by:Marek Vasut <marek.vasut@gmail.com>
-
Thomas Abraham authored
Fix the incorrect macro check for MIU linear mapping conditional compilation. Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Acked-by:
Minkyu Kang <mk7.kang@samsung.com>
-
Chander Kashyap authored
Modifies CPU Frequency to 1GHz and removes hard coding of mmc_pre_ratio for MMC Channel2 in FSYS2 register. Signed-off-by:
Chander Kashyap <chander.kashyap@linaro.org> Acked-by:
-
John Rigby authored
Minimal platform support to boot linux from SD. Supported devices/hw limited to external MMC/SD slot, GPIO, I2C and minimal PRCMU. Signed-off-by:John Rigby <john.rigby@linaro.org> CC: Albert Aribaud <albert.aribaud@free.fr>
-
Michael Brandt authored
Signed-off-by: -
John Rigby authored
Based on ST-Ericsson internal git repo. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Nobuhiro Iwamatsu authored
A value of BSC of the USB was wrong. This updates this. Signed-off-by:Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- May 31, 2011
-
-
Albert ARIBAUD authored
-
Dirk Behme authored
Add a header file with the missing function prototype to fix ca9x4_ct_vxp.c: In function 'cpu_mmc_init': ca9x4_ct_vxp.c:93: warning: implicit declaration of function 'arm_pl180_mmci_init' introduced by commit "ARMV7: Vexpress: Add MMC support" (f0c64526) Signed-off-by:
Dirk Behme <dirk.behme@googlemail.com> CC: Andy Fleming <afleming@freescale.com> CC: Matt Waddel <matt.waddel@linaro.org>
-
Holger Brunck authored
We change default settings for egiga on mgcoge3un. The reason we need this is that we have the gig port on mgcoge3un connected using a back-to-back pair of PHYs. There are no magnetics and because of that the port has to be run with a fixd configuration and auto-negotiation must be disabled. In the default mode the egiga driver uses autoneg to determine port speed - which defaults to 1G (we need 100M full duplex). Add wait for the GPIO line connected to mgcoge3ne before starting mgcoge3un. A board specific ethernet present function was added, because on this board ethernet is always present. The BOCO FPGA access was enhanced and changed to use register definitions. Signed-off-by:
Holger Brunck <holger.brunck@keymile.com> Signed-off-by:
Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by:
Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
-
Valentin Longchamp authored
This allows this configuration to be defined differently for some boards that request it. Signed-off-by: -
Valentin Longchamp authored
The mgcoge2un target was only an intermediate step to mgcoge3un. For this reason the mgcoge2un support was moved to mgcoge3un, because it isn't needed to support both targets. We add the BootROM init file for the mgcoge3un memphis RAM. We also move the suen3 and suen8 boards into the correct category in the MAINTAINERS file. Signed-off-by:
-
Holger Brunck authored
Signed-off-by:
-
Valentin Longchamp authored
This is not supported on our km-arm boards since we have defined CONFIG_SYS_NO_FLASH for our NAND Flash chip. With CONFIG_CMD_JFFS2, the ls command is present and works very badly on our km-arm boards. Signed-off-by:
Prafulla Wadaskar <prafulla@marvell.com> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
-
Valentin Longchamp authored
This environment variable is used to set the bootcount address for the kernel. last_stage_init is not available for arm platforms. So the calls to set_km_var and set_bootcount_addr are done in misc_init_r. Additionally some unneeded printouts were removed. Signed-off-by:
-
Valentin Longchamp authored
Since all the boards define the same env settings, this simplifies the board files. Signed-off-by: -
Valentin Longchamp authored
This define is marvell specific, so it should be present in km_arm. It is however not needed there either, since we set it to the default value that is already set in include/asm/arch-kirkwood/config.h Signed-off-by:
-
- May 26, 2011
-
-
Chander Kashyap authored
Added MMC SPL boot support for SMDKV310. This framework design is based on nand_spl support. Signed-off-by:
-
Chander Kashyap authored
SMDKV310 board is based on Samsung S5PV310 SOC. This SOC is very much similar to S5PC210. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Minkyu Kang authored
The source of pwm clock is fixed at evt1. And some registers for pwm clock are removed. Signed-off-by: -
Jaehoon Chung authored
This patch added set_mmc_clk for external clock control. c210 didn't support host clock control. So We need external_clock_control function for c210. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com>
-
Minkyu Kang authored
S5PC210 SoC have two cpu revisions, and have some difference. So, support the cpu revision for each revision. Signed-off-by:
-
Chander Kashyap authored
SROM config code is made common for S5P series of boards. smdkc100.c now refers to s5p-common/sromc.c for SROM related subroutines. Signed-off-by:
-
seedshope authored
Since we rename _end to __bss_end__, But we need add _end symbol for the end of u-boot image. Signed-off-by:
Zhong Hongbo <bocui107@gmail.com> Signed-off-by:
-
Dirk Behme authored
Fix typo resulting in the compilation error s5p_mmc.c: In function 's5p_mmc_initialize': s5p_mmc.c:469: error: 'struct mmc' has no member named 'm_bmax' introduced by commit "MMC: make b_max unconditional" (8feafcc4) Signed-off-by:
-
Chander Kashyap authored
S5PC2XX: Macro values for Pull Up and Driver Strength were wrong. S5PC1XX: Macro values for Driver Strength were wrong. Signed-off-by:
-
David Müller (ELSOFT AG) authored
Signed-off-by:
David Müller <d.mueller@elsoft.ch> Signed-off-by:
-
David Müller (ELSOFT AG) authored
Signed-off-by:
-
David Müller (ELSOFT AG) authored
Signed-off-by:
-
David Müller (ELSOFT AG) authored
Signed-off-by:
-
- May 24, 2011
-
-
Daniel Hobi authored
Since commit 30486322 (nand erase: .spread, .part, .chip subcommands) the arguments off and size are no longer optional. Signed-off-by:
Daniel Hobi <daniel.hobi@schmid-telecom.ch> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by:
Scott Wood <scottwood@freescale.com>
-
Daniel Hobi authored
Commit 30486322 (nand erase: .spread, .part, .chip subcommands) added a new field to struct nand_erase_options, but forgot to update common/env_nand.c. Depending on the stack state and bad block distribution, saveenv() can thus erase more than CONFIG_ENV_RANGE bytes which may corrupt the following NAND sectors/partitions. Signed-off-by:
-
