GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot

References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org



This patch is for GuruPlug Plus, but it supports Standard version
as well.

Signed-off-by: Siddarth Gore <gores@marvell.com>

The lowlevel_init file contained some hard-coded values
to setup the RAM. These board related values are moved into
the board configuration file.

Signed-off-by: Stefano Babic <sbabic@denx.de>

There is no CPLD on MX51EVK board, so remove CPLD related function.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

Because of s5pc1xx gpio is same as s5p seires SoC,
move gpio functions to drvier/gpio/
and modify structure's name from s5pc1xx_ to s5p_.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Because of other s5p series SoC will use these serial functions,
modify function's name and structure's name.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Alexander Holler <holler@ahsoftware.de>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Fetched from http://www.arm.linux.org.uk/developer/machines/download.php
And built with

repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm


commit 85b3cce880a19e78286570d5fd004cc3cac06f57

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

Added support for LCD and splash image to the QONG module.
The supported display is VBEST-VGG322403.

Signed-off-by: Stefano Babic <sbabic@denx.de>

The MPC83xx SERDES control is different from the other FSL PPC chips.
For now lets split it out so we can standardize on interfaces for
determining of a device on SERDES is configured.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>

Signed-off-by: Lan Chunhe <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

clean up the wrong io_sel for PCI express according to latest manual.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This fixes an overflow during the link phase.

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

cpu.c: In function 'checkcpu':
cpu.c:47: warning: unused variable 'gur'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

For P1022 SATA host controller, the data snoop bit of DW3 in PRDT
is moved to bit28.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

After power on, the SATA host controller of P1022 Rev1 is configured
in legacy mode instead of the expected enterprise mode.

Software needs to clear bit[28] of HControl register to change to
enterprise mode after bringing the host offline.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Add an extra cycle turnaround time to read->write to ensure stability
at high DDR frequencies.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

add the macro definition for Rtt_Nom termination value for DDR3

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Added some needed fines and some misc additional defines
used by p4080 initialization.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Extend pin control and clock control to GUTS memory map

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

When DDR is in synchronous mode, the existing code assigns sysclk
frequency to DDR frequency.  It should be synchronous with the platform
frequency.  CPU frequency is based on platform frequency in synchronous
mode.

Also fix:

* Fixes the bit mask for DDR_SYNC (RCWSR5[184])
* Corrects the detection of synchronous mode.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

While we had ft_pci_board_setup it wasn't being called by
ft_board_setup.  Fix that so we actually update the device tree PCI
nodes on P1_P2_RDB boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot



A fpga parameter file, which contains base address information
and drivers declaration, is generated from Altera's hardware system
description sopc file using tools.

The example fpga parameter file is compatible with EP1C20, EP1S10
and EP1S40 boards. So these boards can be removed after this commit.
Though epcs controller is removed to cut the dependency of altera_spi
driver.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

This patch fixes error when CONFIG_SYS_NO_FLASH. And adds
nand flash and mmc initialization, which should go before
env initialization.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

Global interrupt should be disabled from the beginning.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

This patch adds an option to bypass output waiting when there
is no jtag connection. This allows the jtag uart work similar
to a serial uart, ie, boot even without connection.

This option is enabled with CONFIG_ALTERA_JTAG_UART_BYPASS

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

This function return cache-line aligned allocation which is mapped
to uncached io region.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

This patch adds 64 bits swab support. Most 32 bits processors use
this. We need 64 bits swab for UBI.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

This patch toggles power to reset the cf card.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

This patch allow boards to override the default link script.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>