sh: serial: use readx/writex accessors

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

drivers/serial/serial_sh.c

@@ -18,6 +18,7 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/processor.h>
 
 #if defined(CONFIG_CONS_SCIF0)
@@ -132,17 +133,17 @@ void serial_setbrg(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	*SCBRR = SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ);
+	writeb(SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ), SCBRR);
 }
 
 int serial_init(void)
 {
-	*SCSCR = (SCR_RE | SCR_TE);
-	*SCSMR = 0;
-	*SCSMR = 0;
-	*SCFCR = (FCR_RFRST | FCR_TFRST);
-	*SCFCR;
-	*SCFCR = 0;
+	writew((SCR_RE | SCR_TE), SCSCR);
+	writew(0, SCSMR);
+	writew(0, SCSMR);
+	writew((FCR_RFRST | FCR_TFRST), SCFCR);
+	readw(SCFCR);
+	writew(0, SCFCR);
 
 	serial_setbrg();
 	return 0;
@@ -151,9 +152,9 @@ int serial_init(void)
 static int serial_rx_fifo_level(void)
 {
 #if defined(SCRFDR)
-	return (*SCRFDR >> 0) & FIFOLEVEL_MASK;
+	return (readw(SCRFDR) >> 0) & FIFOLEVEL_MASK;
 #else
-	return (*SCFDR >> 0) & FIFOLEVEL_MASK;
+	return (readw(SCFDR) >> 0) & FIFOLEVEL_MASK;
 #endif
 }
 
@@ -162,15 +163,15 @@ void serial_raw_putc(const char c)
 	unsigned int fsr_bits_to_clear;
 
 	while (1) {
-		if (*SCFSR & FSR_TEND) {	/* Tx fifo is empty */
+		if (readw(SCFSR) & FSR_TEND) { /* Tx fifo is empty */
 			fsr_bits_to_clear = FSR_TEND;
 			break;
 		}
 	}
 
-	*SCFTDR = c;
+	writeb(c, SCFTDR);
 	if (fsr_bits_to_clear != 0)
-		*SCFSR &= ~fsr_bits_to_clear;
+		writew(readw(SCFSR) & ~fsr_bits_to_clear, SCFSR);
 }
 
 void serial_putc(const char c)
@@ -196,22 +197,21 @@ int serial_tstc(void)
 #define RDRF_CLEAR		0x00fc
 void handle_error(void)
 {
-
-	(void)*SCFSR;
-	*SCFSR = FSR_ERR_CLEAR;
-	(void)*SCLSR;
-	*SCLSR = 0x00;
+	readw(SCFSR);
+	writew(FSR_ERR_CLEAR, SCFSR);
+	readw(SCLSR);
+	writew(0x00, SCLSR);
 }
 
 int serial_getc_check(void)
 {
 	unsigned short status;
 
-	status = *SCFSR;
+	status = readw(SCFSR);
 
 	if (status & (FSR_FER | FSR_ER | FSR_BRK))
 		handle_error();
-	if (*SCLSR & LSR_ORER)
+	if (readw(SCLSR) & LSR_ORER)
 		handle_error();
 	return status & (FSR_DR | FSR_RDF);
 }
@@ -224,15 +224,15 @@ int serial_getc(void)
 	while (!serial_getc_check())
 		;
 
-	ch = *SCFRDR;
-	status = *SCFSR;
+	ch = readb(SCFRDR);
+	status = readw(SCFSR);
 
-	*SCFSR = RDRF_CLEAR;
+	writew(RDRF_CLEAR, SCFSR);
 
 	if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
 		handle_error();
 
-	if (*SCLSR & LSR_ORER)
+	if (readw(SCLSR) & LSR_ORER)
 		handle_error();
 
 	return ch;