Rename TEXT_BASE: fix merge conflicts

Commit 14d0a02a "Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE" missed a
few places, especially for boards that were added inbetween. Fix the
remaining issues.

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/a4m072/config.mk

-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# a4m072 board:
-#
-#	Valid values for TEXT_BASE is:
-#
-#	0xFE000000   boot low
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-## Standard: boot low
-TEXT_BASE = 0xFE000000
-endif
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board

board/eNET/u-boot.lds

@@ -27,7 +27,7 @@ ENTRY(_start)
 
 SECTIONS
 {
-	. = TEXT_BASE;		/* Location of bootcode in flash */
+	. = CONFIG_SYS_TEXT_BASE;	/* Location of bootcode in flash */
 	__text_start = .;
 	.text  : { *(.text*); }
 
@@ -94,11 +94,11 @@ SECTIONS
 	 * The fff0 offset of resetvec is important, however.
 	 */
 	. = 0xfffffe00;
-	.start32 : AT (TEXT_BASE + 0x3fe00) { KEEP(*(.start32)); }
+	.start32 : AT (CONFIG_SYS_TEXT_BASE + 0x3fe00) { KEEP(*(.start32)); }
 
 	. = 0xf800;
-	.start16 : AT (TEXT_BASE + 0x3f800) { KEEP(*(.start16)); }
+	.start16 : AT (CONFIG_SYS_TEXT_BASE + 0x3f800) { KEEP(*(.start16)); }
 
 	. = 0xfff0;
-	.resetvec : AT (TEXT_BASE + 0x3fff0) { KEEP(*(.resetvec)); }
+	.resetvec : AT (CONFIG_SYS_TEXT_BASE + 0x3fff0) { KEEP(*(.resetvec)); }
 }

doc/README.arm-relocation

@@ -92,11 +92,11 @@ Relocation with NAND_SPL (example for the tx25):
   the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
   @CONFIG_SYS_NAND_U_BOOT_START
 
-- This u-boot does no ram int, nor cpu register setup. Just looks
-  where it have to relocate and relocate itself to this address.
-  If relocate address = CONFIG_SYS_TEXT_BASE(not the same, as the TEXT_BASE
-  from the nand_spl code), no need to copy, just go on with bss clear
-  and jump to board_init_r.
+- This u-boot does no RAM init, nor CPU register setup. Just look
+  where it has to copy and relocate itself to this address. If
+  relocate address = CONFIG_SYS_TEXT_BASE (not the same, as the
+  CONFIG_SYS_TEXT_BASE from the nand_spl code), then there is no need
+  to copy, just go on with bss clear and jump to board_init_r.
 
 -------------------------------------------------------------------------------------
 

include/configs/a4m072.h

@@ -37,6 +37,8 @@
 #define CONFIG_A4M072		1	/* ... on A4M072 board */
 #define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM */
 
+#define CONFIG_SYS_TEXT_BASE	0xFE000000
+
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -125,7 +127,7 @@
 #define CONFIG_CMD_PCI
 #endif
 
-#if (TEXT_BASE == 0xFE000000)		/* Boot low with 32 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)		/* Boot low with 32 MB Flash */
 #define CONFIG_SYS_LOWBOOT		1
 #define CONFIG_SYS_LOWBOOT32		1
 #endif
@@ -238,7 +240,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT		1
 #endif

nand_spl/nand_boot.c

@@ -224,7 +224,8 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs,
 #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 void board_init_f (ulong bootflag)
 {
-	relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
+	relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
+		       CONFIG_SYS_TEXT_BASE);
 }
 #endif
 

nand_spl/nand_boot_fsl_nfc.c

@@ -266,7 +266,8 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
 #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 void board_init_f (ulong bootflag)
 {
-	relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
+	relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
+		       CONFIG_SYS_TEXT_BASE);
 }
 #endif