diff --git a/Makefile b/Makefile
index 400ef0b5813133b0da7316729c887036699f1c58..ce81bb08e83b255fbb8e35b7f1e331ee019d7bcd 100644
--- a/Makefile
+++ b/Makefile
@@ -229,6 +229,9 @@ endif
 ifeq ($(CPU),ixp)
 LIBS += arch/arm/cpu/ixp/npe/libnpe.o
 endif
+ifeq ($(CONFIG_OF_EMBED),y)
+LIBS += dts/libdts.o
+endif
 LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
 LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
 	fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
@@ -879,6 +882,7 @@ clobber:	clean
 	@rm -f $(obj)u-boot.kwb
 	@rm -f $(obj)u-boot.imx
 	@rm -f $(obj)u-boot.ubl
+	@rm -f $(obj)u-boot.dtb
 	@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
 	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
 	@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@@ -886,6 +890,7 @@ clobber:	clean
 	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
 	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
 	@[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f
+	@rm -f $(obj)dts/*.tmp
 
 mrproper \
 distclean:	clobber unconfig
diff --git a/README b/README
index d618957eae2b938e6adb05e69f2da16ea09f1acb..094869c10651ebdc4f7f27ba8b9c2b87ce08d33c 100644
--- a/README
+++ b/README
@@ -824,8 +824,15 @@ The following options need to be configured:
 		experimental and only available on a few boards. The device
 		tree is available in the global data as gd->fdt_blob.
 
-		U-Boot needs to get its device tree from somewhere. This will
-		be enabled in a future patch.
+		U-Boot needs to get its device tree from somewhere. At present
+		the only way is to embed it in the image with CONFIG_OF_EMBED.
+
+		CONFIG_OF_EMBED
+		If this variable is defined, U-Boot will embed a device tree
+		binary in its image. This device tree file should be in the
+		board directory and called <soc>-<board>.dts. The binary file
+		is then picked up in board_init_f() and made available through
+		the global data structure as gd->blob.
 
 - Watchdog:
 		CONFIG_WATCHDOG
diff --git a/config.mk b/config.mk
index bad72b76892b173da27fdaa81b364e23bc8e9158..11b67e540ef35cf0ab51c1bd4fb5892a5d1baea5 100644
--- a/config.mk
+++ b/config.mk
@@ -124,6 +124,7 @@ STRIP	= $(CROSS_COMPILE)strip
 OBJCOPY = $(CROSS_COMPILE)objcopy
 OBJDUMP = $(CROSS_COMPILE)objdump
 RANLIB	= $(CROSS_COMPILE)RANLIB
+DTC	= dtc
 
 #########################################################################
 
diff --git a/doc/README.fdt-control b/doc/README.fdt-control
new file mode 100644
index 0000000000000000000000000000000000000000..3f8bb5a670175088c0147e7d6d57cefc36c1a32d
--- /dev/null
+++ b/doc/README.fdt-control
@@ -0,0 +1,172 @@
+#
+# Copyright (c) 2011 The Chromium OS Authors.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+Device Tree Control in U-Boot
+=============================
+
+This feature provides for run-time configuration of U-Boot via a flat
+device tree (fdt). U-Boot configuration has traditionally been done
+using CONFIG options in the board config file. This feature aims to
+make it possible for a single U-Boot binary to support multiple boards,
+with the exact configuration of each board controlled by a flat device
+tree (fdt). This is the approach recently taken by the ARM Linux kernel
+and has been used by PowerPC for some time.
+
+The fdt is a convenient vehicle for implementing run-time configuration
+for three reasons. Firstly it is easy to use, being a simple text file.
+It is extensible since it consists of nodes and properties in a nice
+hierarchical format.
+
+Finally, there is already excellent infrastructure for the fdt: a
+compiler checks the text file and converts it to a compact binary
+format, and a library is already available in U-Boot (libfdt) for
+handling this format.
+
+The dts directory contains a Makefile for building the device tree blob
+and embedding it in your U-Boot image. This is useful since it allows
+U-Boot to configure itself according to what it finds there. If you have
+a number of similar boards with different peripherals, you can describe
+the features of each board in the device tree file, and have a single
+generic source base.
+
+To enable this feature, add CONFIG_OF_CONTROL to your board config file.
+
+
+What is a Flat Device Tree?
+---------------------------
+
+An fdt can be specified in source format as a text file. To read about
+the fdt syntax, take a look at the specification here:
+
+https://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
+
+You also might find this section of the Linux kernel documentation
+useful: (access this in the Linux kernel source code)
+
+	Documentation/devicetree/booting-without-of.txt
+
+There is also a mailing list:
+
+	http://lists.ozlabs.org/listinfo/devicetree-discuss
+
+In case you are wondering, OF stands for Open Firmware.
+
+
+Tools
+-----
+
+To use this feature you will need to get the device tree compiler here:
+
+	git://jdl.com/software/dtc.git
+
+For example:
+
+	$ git clone git://jdl.com/software/dtc.git
+	$ cd dtc
+	$ make
+	$ sudo make install
+
+Then run the compiler (your version will vary):
+
+	$ dtc -v
+	Version: DTC 1.2.0-g2cb4b51f
+	$ make tests
+	$ cd tests
+	$ ./run_tests.sh
+	********** TEST SUMMARY
+	*     Total testcases:	1371
+	*                PASS:	1371
+	*                FAIL:	0
+	*   Bad configuration:	0
+	* Strange test result:	0
+
+You will also find a useful ftdump utility for decoding a binary file.
+
+
+Where do I get an fdt file for my board?
+----------------------------------------
+
+You may find that the Linux kernel has a suitable file. Look in the
+kernel source in arch/<arch>/boot/dts.
+
+If not you might find other boards with suitable files that you can
+modify to your needs. Look in the board directories for files with a
+.dts extension.
+
+Failing that, you could write one from scratch yourself!
+
+
+Configuration
+-------------
+
+Use:
+
+#define CONFIG_DEFAULT_DEVICE_TREE	"<name>"
+
+to set the filename of the device tree source. Then put your device tree
+file into
+
+	board/<vendor>/dts/<name>.dts
+
+This should include your CPU or SOC's device tree file, placed in
+arch/<arch>/dts, and then make any adjustments required. The name of this
+is CONFIG_ARCH_DEVICE_TREE.dts.
+
+If CONFIG_OF_EMBED is defined, then it will be picked up and built into
+the U-Boot image (including u-boot.bin).
+
+If CONFIG_OF_SEPARATE is defined, then it will be built and placed in
+a u-boot.dtb file alongside u-boot.bin. A common approach is then to
+join the two:
+
+	cat u-boot.bin u-boot.dtb >image.bin
+
+and then flash image.bin onto your board.
+
+You cannot use both of these options at the same time.
+
+
+Limitations
+-----------
+
+U-Boot is designed to build with a single architecture type and CPU
+type. So for example it is not possible to build a single ARM binary
+which runs on your AT91 and OMAP boards, relying on an fdt to configure
+the various features. This is because you must select one of
+the CPU families within arch/arm/cpu/arm926ejs (omap or at91) at build
+time. Similarly you cannot build for multiple cpu types or
+architectures.
+
+That said the complexity reduction by using fdt to support variants of
+boards which use the same SOC / CPU can be substantial.
+
+It is important to understand that the fdt only selects options
+available in the platform / drivers. It cannot add new drivers (yet). So
+you must still have the CONFIG option to enable the driver. For example,
+you need to define CONFIG_SYS_NS16550 to bring in the NS16550 driver,
+but can use the fdt to specific the UART clock, peripheral address, etc.
+In very broad terms, the CONFIG options in general control *what* driver
+files are pulled in, and the fdt controls *how* those files work.
+
+--
+Simon Glass <sjg@chromium.org>
+1-Sep-11
diff --git a/dts/Makefile b/dts/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..5792afd2719aecbcf886f1eda7b069c4d0a2f850
--- /dev/null
+++ b/dts/Makefile
@@ -0,0 +1,103 @@
+#
+# Copyright (c) 2011 The Chromium OS Authors.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# This Makefile builds the internal U-Boot fdt if CONFIG_OF_CONTROL is
+# enabled. See doc/README.fdt-control for more details.
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)libdts.o
+
+$(if $(CONFIG_DEFAULT_DEVICE_TREE),,\
+$(error Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file))
+DEVICE_TREE = $(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE))
+
+$(if $(CONFIG_ARCH_DEVICE_TREE),,\
+$(error Your architecture does not have device tree support enabled. \
+Please define CONFIG_ARCH_DEVICE_TREE))
+
+# We preprocess the device tree file provide a useful define
+DTS_CPPFLAGS := -DARCH_CPU_DTS=\"../arch/$(ARCH)/dts/$(CONFIG_ARCH_DEVICE_TREE).dtsi\"
+
+all:	$(obj).depend $(LIB)
+
+# Use a constant name for this so we can access it from C code.
+# objcopy doesn't seem to allow us to set the symbol name independently of
+# the filename.
+DT_BIN	:= $(obj)dt.dtb
+
+$(DT_BIN): $(TOPDIR)/board/$(VENDOR)/dts/$(DEVICE_TREE).dts
+	cat $< | $(CPP) -P $(DTS_CPPFLAGS) - >$@.tmp
+	$(DTC) -R 4 -p 0x1000 -O dtb -o ${DT_BIN} $@.tmp
+	rm $@.tmp
+
+process_lds = \
+	$(1) | sed -r -n 's/^OUTPUT_$(2)[ ("]*([^")]*).*/\1/p'
+
+# Run the compiler and get the link script from the linker
+GET_LDS = $(CC) $(CFLAGS) $(LDFLAGS) -Wl,--verbose 2>&1
+
+$(obj)dt.o: $(DT_BIN)
+	# We want the output format and arch.
+	# We also hope to win a prize for ugliest Makefile / shell interaction
+	# We look in the LDSCRIPT first.
+	# Then try the linker which should give us the answer.
+	# Then check it worked.
+	oformat=`$(call process_lds,cat $(LDSCRIPT),FORMAT)` ;\
+	oarch=`$(call process_lds,cat $(LDSCRIPT),ARCH)` ;\
+	\
+	[ -z $${oformat} ] && \
+		oformat=`$(call process_lds,$(GET_LDS),FORMAT)` ;\
+	[ -z $${oarch} ] && \
+		oarch=`$(call process_lds,$(GET_LDS),ARCH)` ;\
+	\
+	[ -z $${oformat} ] && \
+		echo "Cannot read OUTPUT_FORMAT from lds file $(LDSCRIPT)" && \
+		exit 1 || true ;\
+	[ -z $${oarch} ] && \
+		echo "Cannot read OUTPUT_ARCH from lds file $(LDSCRIPT)" && \
+		exit 1 || true ;\
+	\
+	cd $(dir ${DT_BIN}) && \
+	$(OBJCOPY) -I binary -O $${oformat} -B $${oarch} \
+		$(notdir ${DT_BIN}) $@
+	rm $(DT_BIN)
+
+OBJS-$(CONFIG_OF_EMBED)	:= dt.o
+
+COBJS	:= $(OBJS-y)
+
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+binary:	$(DT_BIN)
+
+$(LIB):	$(OBJS) $(DTB)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/include/common.h b/include/common.h
index 825ab72c09ce129240433befa83e6cb8b088fc94..fb41d7ae5fa3f37792f15bf216fc7ad56f6c003e 100644
--- a/include/common.h
+++ b/include/common.h
@@ -276,6 +276,7 @@ int	checkdram     (void);
 int	last_stage_init(void);
 extern ulong monitor_flash_len;
 int mac_read_from_eeprom(void);
+extern u8 _binary_dt_dtb_start[];	/* embedded device tree blob */
 
 /* common/flash.c */
 void flash_perror (int);