diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c
index c719798a6608d8f7d08c5f7942ec3cc71088fe3c..c5c8ab7e4d88f74e677f0eeb3d5d82c9016920fc 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/dram.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c
@@ -49,7 +49,7 @@ u32 orion5x_sdram_bar(enum memory_bank bank)
result = winregs[bank].base;
return result;
}
-
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
int dram_init(void)
{
int i;
@@ -62,3 +62,25 @@ int dram_init(void)
}
return 0;
}
+#else
+int dram_init (void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size(
+ (volatile long *) orion5x_sdram_bar(0),
+ CONFIG_MAX_RAM_BANK_SIZE);
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
+ gd->bd->bi_dram[i].size = get_ram_size(
+ (volatile long *) (gd->bd->bi_dram[i].start),
+ CONFIG_MAX_RAM_BANK_SIZE);
+ }
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index cf40ce12928359c5238d02a32ed361ccc153c101..16ee972f2b9aca1339bbb4f5c6c21836a091b029 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -114,12 +114,15 @@ _fiq:
*************************************************************************
*/
+.globl _TEXT_BASE
_TEXT_BASE:
.word TEXT_BASE
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
_armboot_start:
.word _start
+#endif
/*
* These are defined in the board-specific linker script.
@@ -144,6 +147,35 @@ FIQ_STACK_START:
.word 0x0badc0de
#endif
+#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+.globl _datarel_start
+_datarel_start:
+ .word __datarel_start
+
+.globl _datarelrolocal_start
+_datarelrolocal_start:
+ .word __datarelrolocal_start
+
+.globl _datarellocal_start
+_datarellocal_start:
+ .word __datarellocal_start
+
+.globl _datarelro_start
+_datarelro_start:
+ .word __datarelro_start
+
+.globl _got_start
+_got_start:
+ .word __got_start
+
+.globl _got_end
+_got_end:
+ .word __got_end
/*
* the actual reset code
@@ -166,6 +198,135 @@ reset:
bl cpu_init_crit
#endif
+/* Set stackpointer in internal RAM to call board_init_f */
+call_board_init_f:
+ ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ ldr r0,=0x00000000
+ bl board_init_f
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ */
+ .globl relocate_code
+relocate_code:
+ mov r4, r0 /* save addr_sp */
+ mov r5, r1 /* save addr of gd */
+ mov r6, r2 /* save addr of destination */
+ mov r7, r2 /* save addr of destination */
+
+ /* Set up the stack */
+stack_setup:
+ mov sp, r4
+
+ adr r0, _start
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+ cmp r0, r6
+ beq clear_bss
+
+#ifndef CONFIG_SKIP_RELOCATE_UBOOT
+copy_loop:
+ ldmia r0!, {r9-r10} /* copy from source address [r0] */
+ stmia r6!, {r9-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+
+#ifndef CONFIG_PRELOADER
+ /* fix got entries */
+ ldr r1, _TEXT_BASE /* Text base */
+ mov r0, r7 /* reloc addr */
+ ldr r2, _got_start /* addr in Flash */
+ ldr r3, _got_end /* addr in Flash */
+ sub r3, r3, r1
+ add r3, r3, r0
+ sub r2, r2, r1
+ add r2, r2, r0
+
+fixloop:
+ ldr r4, [r2]
+ sub r4, r4, r1
+ add r4, r4, r0
+ str r4, [r2]
+ add r2, r2, #4
+ cmp r2, r3
+ bne fixloop
+#endif
+#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
+
+clear_bss:
+#ifndef CONFIG_PRELOADER
+ ldr r0, _bss_start
+ ldr r1, _bss_end
+ ldr r3, _TEXT_BASE /* Text base */
+ mov r4, r7 /* reloc addr */
+ sub r0, r0, r3
+ add r0, r0, r4
+ sub r1, r1, r3
+ add r1, r1, r4
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
+ bl coloured_LED_init
+ bl red_LED_on
+#endif
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+#ifdef CONFIG_NAND_SPL
+ ldr pc, _nand_boot
+
+_nand_boot: .word nand_boot
+#else
+ ldr r0, _TEXT_BASE
+ ldr r2, _board_init_r
+ sub r2, r2, r0
+ add r2, r2, r7 /* position from board_init_r in RAM */
+ /* setup parameters for board_init_r */
+ mov r0, r5 /* gd_t */
+ mov r1, r7 /* dest_addr */
+ /* jump to it ... */
+ mov lr, r2
+ mov pc, lr
+
+_board_init_r: .word board_init_r
+#endif
+
+#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl cpu_init_crit
+#endif
+
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
@@ -221,7 +382,7 @@ _start_armboot:
#else
.word start_armboot
#endif /* CONFIG_NAND_SPL */
-
+#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
/*
*************************************************************************
@@ -307,10 +468,13 @@ cpu_init_crit:
@ carve out a frame on current user stack
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
ldr r2, _armboot_start
sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+#else
+ ldr r2, IRQ_STACK_START_IN
+#endif
@ get values for "aborted" pc and cpsr (into parm regs)
ldmia r2, {r2 - r3}
add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
@@ -342,9 +506,13 @@ cpu_init_crit:
.endm
.macro get_bad_stack
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
ldr r13, _armboot_start @ setup our mode stack
sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+#else
+ ldr r13, IRQ_STACK_START_IN @ setup our mode stack
+#endif
str lr, [r13] @ save caller lr in position 0 of saved stack
mrs lr, spsr @ get the spsr
diff --git a/arch/arm/cpu/arm926ejs/u-boot.lds b/arch/arm/cpu/arm926ejs/u-boot.lds
index ecbc58c7c24fa83f23c9a9a83649457087a73e82..02eb8ca6072809a9de96ac055a832dc6c56baae2 100644
--- a/arch/arm/cpu/arm926ejs/u-boot.lds
+++ b/arch/arm/cpu/arm926ejs/u-boot.lds
@@ -39,11 +39,23 @@ SECTIONS
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
- .data : { *(.data) }
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+ __got_start = .;
. = ALIGN(4);
.got : { *(.got) }
+ __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
diff --git a/board/karo/tx25/config.mk b/board/karo/tx25/config.mk
index 732a14a6d1e3a7263df4a5f886e0b516b8dbedac..51ca1ab0f0d0d14495596e18f990f386ae9c3660 100644
--- a/board/karo/tx25/config.mk
+++ b/board/karo/tx25/config.mk
@@ -1,5 +1,5 @@
ifdef CONFIG_NAND_SPL
-TEXT_BASE = 0x81ec0000
+TEXT_BASE = 0x810c0000
else
-TEXT_BASE = 0x81f00000
+TEXT_BASE = 0x81fc0000
endif
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 2608698e2905edebc39a954e908070b0b00c9e50..dc57d5c48506ea33eb128290e2f3a7984dcb1ad3 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -159,7 +159,14 @@ int board_late_init(void)
int dram_init (void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+void dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
@@ -167,9 +174,9 @@ int dram_init (void)
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2,
PHYS_SDRAM_2_SIZE);
-#endif
+#else
- return 0;
+#endif
}
int checkboard(void)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index d7cbd7a2a99099db1d411145679da3ec1e300255..7c0b858887397bbe979f060fc3054bb093802167 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -225,6 +225,7 @@ U_BOOT_CMD(
);
#endif
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
int dram_init(void)
{
int i;
@@ -234,9 +235,32 @@ int dram_init(void)
gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
kw_sdram_bs(i));
}
+
+ return 0;
+}
+#else
+int dram_init(void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ /* Fix this */
+ gd->ram_size = get_ram_size((volatile void *)kw_sdram_bar(0),
+ kw_sdram_bs(0));
return 0;
}
+void dram_init_banksize(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = kw_sdram_bar(i);
+ gd->bd->bi_dram[i].size = kw_sdram_bs(i);
+ gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
+ kw_sdram_bs(i));
+ }
+}
+#endif
+
/* Configure and enable MV88E1118 PHY */
void reset_phy(void)
{
diff --git a/board/logicpd/imx27lite/config.mk b/board/logicpd/imx27lite/config.mk
index a2e7768dd8639cdead529d14ffe04b386fff0267..2f9c4e629cef5eee53e9ad1368236ad10e9ba4b8 100644
--- a/board/logicpd/imx27lite/config.mk
+++ b/board/logicpd/imx27lite/config.mk
@@ -1 +1 @@
-TEXT_BASE = 0xA7F00000
+TEXT_BASE = 0xc0000000
diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
index 442741547bcce3c5e8a787ce4e02d647dfa213dc..6eb5cc2dd6c1d2b74c2d9c9c9a948a7aaa26fc26 100644
--- a/board/logicpd/imx27lite/imx27lite.c
+++ b/board/logicpd/imx27lite/imx27lite.c
@@ -66,19 +66,22 @@ int board_init (void)
int dram_init (void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
-#if CONFIG_NR_DRAM_BANKS > 0
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
-#endif
#if CONFIG_NR_DRAM_BANKS > 1
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2,
PHYS_SDRAM_2_SIZE);
#endif
-
- return 0;
}
int checkboard(void)
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index 6be1a12923acde7c350c7d1ed24186d28aaf0d69..e3ed60ecdcfea4e072612b3efe569e6040c20f6a 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -43,6 +43,29 @@ CONFIG_SYS_ARM_WITHOUT_RELOC defined!!!
-------------------------------------------------------------------------------------
+For boards which boot from nand_spl, it is possible to save a copy
+if TEXT_BASE == relocation address! This prevents that uboot code
+is copied again in relocate_code().
+
+example for the tx25 board:
+
+a) cpu starts
+b) it copies the first page in nand to internal ram
+ (nand_spl_code)
+c) end executes this code
+d) this initialize CPU, RAM, ... and copy itself to RAM
+ (this bin must fit in one page, so board_init_f()
+ don;t fit in it ... )
+e) there it copy u-boot to CONFIG_SYS_NAND_U_BOOT_DST and
+ starts this image @ CONFIG_SYS_NAND_U_BOOT_START
+f) u-boot code steps through board_init_f() and calculates
+ the relocation address and copy itself to it
+
+If TEXT_BASE == relocation address, the copying of u-boot
+in f) could be saved.
+
+-------------------------------------------------------------------------------------
+
ToDo:
- fill in bd_t infos (check)
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 357715d660c021e696bcceb2205237410c57fa5b..016a21e9d0bdb62ae7df20e4a8c5a3756899b706 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -39,7 +39,6 @@
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
/*
* Memory Info
@@ -137,4 +136,9 @@
#undef CONFIG_CMD_ENV
#endif
+/* additions for new relocation code, must added to all boards */
+#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+#define CONFIG_SYS_SDRAM_BASE 0xc0000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
+ CONFIG_SYS_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 33550ba66147f25c19ca1797c90224046b65c975..812e5f2e7180f65270ba12eda372aff96f1f86b6 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -235,4 +235,9 @@
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
+/* additions for new relocation code, must added to all boards */
+#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
+ CONFIG_SYS_GBL_DATA_SIZE)
#endif /* __IMX27LITE_COMMON_CONFIG_H */
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index 1617e697deb6abacf2dba1d699fe39b4bb71218f..8673e6ff64dbce957de46b4f9c88dfee7d468950 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -180,4 +180,8 @@ int get_scl (void);
#undef CONFIG_JFFS2_CMDLINE
#endif
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_INIT_SP_ADDR (0x00000000 + 0x1000 - /* Fix this */ \
+ CONFIG_SYS_GBL_DATA_SIZE)
#endif /* _CONFIG_KM_ARM_H */
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 013aa3541c842b231df967e51b16fdf1fd6acb18..c798570aec97f511ac12c2be0c0bb5bbf0c10f38 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -40,9 +40,9 @@
/* Start copying real U-boot from the second page */
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
-/* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x81f00000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x81fc0000)
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_SPARE_SIZE 64
@@ -52,7 +52,6 @@
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
#else
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
#endif
#define CONFIG_DISPLAY_CPUINFO
@@ -177,4 +176,10 @@
"update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0" \
"upd=run load update\0" \
+/* additions for new relocation code, must added to all boards */
+#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
+ CONFIG_SYS_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds
index 423bed386c4b22adb53cfebc04f6723cc788b866..c57255753555f48609d38921b6963445fd948cdd 100644
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ b/nand_spl/board/karo/tx25/u-boot.lds
@@ -41,11 +41,23 @@ SECTIONS
.rodata : { *(.rodata) }
. = ALIGN(4);
- .data : { *(.data) }
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+ __got_start = .;
. = ALIGN(4);
.got : { *(.got) }
+ __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }