diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 61276d22a286bd43b5718b944c4356cdb0241dcb..e47928d0f7c0cffad4e275512b94fa0db0f5fa72 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -34,6 +34,7 @@ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h> #endif +#include <asm/io.h> extern int i2c_soft_read_pin (void); @@ -400,7 +401,7 @@ static void set_scl (int state) static int get_sda (void) { - return i2c_soft_read_pin (); + return I2C_READ; } static int get_scl (void) diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 508d3d7d784be3ea6322f7e378806413b43d5e41..ebe60e23380e662422b38c0c6e2df4f5aaeae9dc 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -28,6 +28,7 @@ #include <common.h> #ifdef CONFIG_MPC8260 /* only valid for MPC8260 */ #include <ioports.h> +#include <asm/io.h> #endif #ifdef CONFIG_AT91RM9200 /* need this for the at91rm9200 */ #include <asm/io.h> @@ -39,6 +40,9 @@ #ifdef CONFIG_LPC2292 #include <asm/arch/hardware.h> #endif +#ifdef CONFIG_MPC866 /* only valid for MPC866 */ +#include <asm/io.h> +#endif #include <i2c.h> /* #define DEBUG_I2C */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 416e4db0daa2e4f2b7b9263dc6649b2d07c3b66e..1604285da0b3fbb3b424db06c66a01a615620ab5 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -346,8 +346,8 @@ /* * Software (bit-bang) I2C driver configuration */ -#define I2C_BASE_DIR (CONFIG_SYS_PIGGY_BASE + 0x04) -#define I2C_BASE_PORT (CONFIG_SYS_PIGGY_BASE + 0x09) +#define I2C_BASE_DIR ((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04)) +#define I2C_BASE_PORT ((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09)) #define SDA_BIT 0x40 #define SCL_BIT 0x80 @@ -356,18 +356,18 @@ #define I2C_ACTIVE do {} while (0) #define I2C_TRISTATE do {} while (0) -#define I2C_READ i2c_soft_read_pin () +#define I2C_READ ((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT) #define I2C_SDA(bit) if(bit) { \ - *(unsigned short *)(I2C_BASE_DIR) &= ~SDA_CONF; \ + clrbits(be16, I2C_BASE_DIR, SDA_CONF); \ } else { \ - *(unsigned char *)(I2C_BASE_PORT) &= ~SDA_BIT; \ - *(unsigned short *)(I2C_BASE_DIR) |= SDA_CONF; \ + clrbits(8, I2C_BASE_PORT, SDA_BIT); \ + setbits(be16, I2C_BASE_DIR, SDA_CONF); \ } #define I2C_SCL(bit) if(bit) { \ - *(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF; \ + clrbits(be16, I2C_BASE_DIR, SCL_CONF); \ } else { \ - *(unsigned char *)(I2C_BASE_PORT) &= ~SCL_BIT; \ - *(unsigned short *)(I2C_BASE_DIR) |= SCL_CONF; \ + clrbits(8, I2C_BASE_PORT, SCL_BIT); \ + setbits(be16, I2C_BASE_DIR, SCL_CONF); \ } #define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */