diff --git a/CHANGELOG b/CHANGELOG
index 5ccee97257bba3582613436e06cd8585275835bd..1136f11f7acb840fcf6d8c8bba51bcadf6feed62 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Prepare for SoC rework of ARM code:
+ - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
+ - rename memsetup into lowlevel_init (function name and source files)
+
* Fix problems with SNTP support;
enable SNTP support in some boards.
diff --git a/README b/README
index a9c052c0592ff4aaa5e1ba03e992ee9d6a6b7adb..6cc7405512ee64f034ebd9b24ee9b4d16e7c13df 100644
--- a/README
+++ b/README
@@ -2128,6 +2128,15 @@ Low Level (hardware related) configuration options:
This only takes effect if the memory commands are activated
globally (CFG_CMD_MEM).
+- CONFIG_INIT_CRITICAL
+ [ARM only] If this variable is NOT defined, then
+ certain critical initializations (like setting up the
+ memory controller) are omitted. Normally this
+ variable MUST be defined for all boards. The only
+ exception is when U-Boot is loaded (to RAM) by some
+ other boot loader or by a debugger which performs
+ these intializations itself.
+
Building the Software:
======================
diff --git a/board/assabet/setup.S b/board/assabet/setup.S
index fefb431af2044af0bb81df1b3a49e6416f855c61..56ea0dd9284fd7fb22b921c5511d3ce94b22040d 100644
--- a/board/assabet/setup.S
+++ b/board/assabet/setup.S
@@ -80,8 +80,8 @@ BCR_DB1110: .long ASSABET_BCR_DB1110
LEDS: .long NEPONSET_LEDS
- .globl memsetup
-memsetup:
+ .globl lowlevel_init
+lowlevel_init:
/* Setting up the memory and stuff */
diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
index 3ab97dfdc0c8bfa46e49da44a1bf4d0aca70b7ec..83e3ba458ad1c4fc2d4bf3293dbebe2c0e115f63 100644
--- a/board/cerf250/Makefile
+++ b/board/cerf250/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := cerf250.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/cerf250/memsetup.S b/board/cerf250/lowlevel_init.S
similarity index 98%
rename from board/cerf250/memsetup.S
rename to board/cerf250/lowlevel_init.S
index f3d373a8a24c2190f4ca72b7020aaf6faae58918..c9b68d7ff39b08e0c5f9d847416632aa53b752b0 100644
--- a/board/cerf250/memsetup.S
+++ b/board/cerf250/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
* Memory setup
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* Set up GPIO pins first ----------------------------------------- */
@@ -403,9 +403,9 @@ initclks:
#endif
/* ---------------------------------------------------------------- */
- /* End memsetup */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
-endmemsetup:
+endlowlevel_init:
mov pc, lr
diff --git a/board/cradle/Makefile b/board/cradle/Makefile
index 5a321eb3939e032942ee661da606dad3bcfb85dd..265d50043ca875db6d126dd509d4490dc2f3bede 100644
--- a/board/cradle/Makefile
+++ b/board/cradle/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := cradle.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/cradle/memsetup.S b/board/cradle/lowlevel_init.S
similarity index 99%
rename from board/cradle/memsetup.S
rename to board/cradle/lowlevel_init.S
index 8800cb0cb72426daa1acef80a492fc46cebdc20f..2fd307f1d0e34c072fdaf097b1a84f2daed2ee41 100644
--- a/board/cradle/memsetup.S
+++ b/board/cradle/lowlevel_init.S
@@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
.endm
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -512,4 +512,4 @@ mem_init:
mov pc, r10
-@ End memsetup
+@ End lowlevel_init
diff --git a/board/csb226/Makefile b/board/csb226/Makefile
index ac94642453d45b894be94ea01d79d154f492a3ec..5b311a9450d2d354f49b85fb64272dcc3683d5bf 100644
--- a/board/csb226/Makefile
+++ b/board/csb226/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := csb226.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/logodl/memsetup.S b/board/csb226/lowlevel_init.S
similarity index 98%
rename from board/logodl/memsetup.S
rename to board/csb226/lowlevel_init.S
index 68577ca0699e8d7790ee880f219c19634350caf1..aa9dcba6fc46b4e46a689e83c700d78c95ddd235 100644
--- a/board/logodl/memsetup.S
+++ b/board/csb226/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -46,8 +46,8 @@ _TEXT_BASE:
* Memory setup
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -429,9 +429,9 @@ initclks:
#endif
/* ---------------------------------------------------------------- */
- /* End memsetup */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
-endmemsetup:
+endlowlevel_init:
mov pc, lr
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
index c0c3f6785b42748408b38a662dab041f596474f9..548fd528ba1a937e616eec2134e8c9aebff3524e 100644
--- a/board/dave/B2/Makefile
+++ b/board/dave/B2/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := B2.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/dave/B2/memsetup.S b/board/dave/B2/lowlevel_init.S
similarity index 99%
rename from board/dave/B2/memsetup.S
rename to board/dave/B2/lowlevel_init.S
index 3f64cb3749b0f58b457a78a7f3398158eea68fe2..2f3a3645ed60e28563992d3ea20184b14516b33f 100644
--- a/board/dave/B2/memsetup.S
+++ b/board/dave/B2/lowlevel_init.S
@@ -149,8 +149,8 @@ MEMORY_CONFIG:
.word 0x20 /*MRSR7*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/*
the next instruction fail due memory relocation...
diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile
index d1cdc6b9244c1ca3257633671f85cef9cafe2da0..d9b0e2d258a50b125a6cefe2fe9c7434f14f6857 100644
--- a/board/dbau1x00/Makefile
+++ b/board/dbau1x00/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
-SOBJS = memsetup.o
+SOBJS = lowlevel_init.o
$(LIB): .depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/dbau1x00/memsetup.S b/board/dbau1x00/lowlevel_init.S
similarity index 99%
rename from board/dbau1x00/memsetup.S
rename to board/dbau1x00/lowlevel_init.S
index c96d8a5099658bd608c021f54c40345f97ad45ec..7afd5840c8628a6925e0067035ea2d6c79d15656 100644
--- a/board/dbau1x00/memsetup.S
+++ b/board/dbau1x00/lowlevel_init.S
@@ -16,8 +16,8 @@
.set noreorder
.set mips32
- .globl memsetup
-memsetup:
+ .globl lowlevel_init
+lowlevel_init:
/*
* Step 1) Establish CPU endian mode.
* Db1500-specific:
diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile
index 31ef6954cdce5f8bcbb47e753df1af3cafa883cb..eaa38bc3c13b062112db0f7efaf8fd9b6ba91d36 100644
--- a/board/dnp1110/Makefile
+++ b/board/dnp1110/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := dnp1110.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/lowlevel_init.S
similarity index 98%
rename from board/dnp1110/memsetup.S
rename to board/dnp1110/lowlevel_init.S
index 1622aea5044d8b6a0633ad50d66346dd78e80f94..7730be343794ee693a7bce0526cd625b0805cfe1 100644
--- a/board/dnp1110/memsetup.S
+++ b/board/dnp1110/lowlevel_init.S
@@ -63,8 +63,8 @@ smcnfg: .long 0x00000000
/* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
ldr r0, MEM_BASE
diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile
index 2b4c975b8e8b1848e6be843b41ed25775816a909..c53a3c7a0d66cbf9e271316bf94b5455c044b0fb 100644
--- a/board/ep7312/Makefile
+++ b/board/ep7312/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := ep7312.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/ep7312/memsetup.S b/board/ep7312/lowlevel_init.S
similarity index 98%
rename from board/ep7312/memsetup.S
rename to board/ep7312/lowlevel_init.S
index 6078937b4cda95485e2f4c9dcf438bbc21a0cfca..5dadb313b1befc791d6ca0c2498f1d2c84247e9d 100644
--- a/board/ep7312/memsetup.S
+++ b/board/ep7312/lowlevel_init.S
@@ -45,8 +45,8 @@ sdrfpr_val: .long 0x00000240
sdconf_val: .long 0x00000522
/* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/*
* SYSCON1-3
*/
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
index 1ab4dfb368cf5977fa52a537a29f95e1677f07cd..10850a95e47aa9d5653255f5d4688e0da131e612 100644
--- a/board/evb4510/Makefile
+++ b/board/evb4510/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := evb4510.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
diff --git a/board/evb4510/memsetup.S b/board/evb4510/lowlevel_init.S
similarity index 97%
rename from board/evb4510/memsetup.S
rename to board/evb4510/lowlevel_init.S
index 915af1e9e608db39f39af3617664bca04886267d..7184d7259a5c30981999d011016c2ba7316000b3 100644
--- a/board/evb4510/memsetup.S
+++ b/board/evb4510/lowlevel_init.S
@@ -31,7 +31,7 @@
*
* This memory map allows us to relocate from FLASH to SRAM. After
* power-on reset the CPU only knows about the FLASH memory at address
- * 0x00000000. After memsetup completes the memory map will be:
+ * 0x00000000. After lowlevel_init completes the memory map will be:
*
* Memory Addr
* 0x00000000
@@ -54,8 +54,8 @@
*
***********************************************************************/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* preserve the temp register (r12 AKA ip) and remap it. */
ldr r1, =SRAM_BASE+0xC
diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile
index d0f7d1cffaff33496cb7b0bd7deb8b24b40ddb8a..1954d661c3d4aabbf4a3507c60c9fe57d58d3524 100644
--- a/board/gcplus/Makefile
+++ b/board/gcplus/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := gcplus.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/gcplus/memsetup.S b/board/gcplus/lowlevel_init.S
similarity index 95%
rename from board/gcplus/memsetup.S
rename to board/gcplus/lowlevel_init.S
index 02f56858244147b337be1d52b3912c4d92e5bf74..f292c4d28abdb1b0cdd9212542c8d8cad7963682 100644
--- a/board/gcplus/memsetup.S
+++ b/board/gcplus/lowlevel_init.S
@@ -29,11 +29,11 @@
#include "version.h"
- .globl memsetup
-memsetup:
+ .globl lowlevel_init
+lowlevel_init:
/* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us.
* However the darn thing leaves the MMU enabled before handing control
- * over to us. So we need to disable the MMU and we use memsetup
+ * over to us. So we need to disable the MMU and we use lowlevel_init
* to do it.
*/
diff --git a/board/impa7/Makefile b/board/impa7/Makefile
index f8323e0b97fabdec8d84d1631ad83879a65299d4..08543f94f220023e9a7aad1b3b69970e2b963548 100644
--- a/board/impa7/Makefile
+++ b/board/impa7/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := impa7.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/impa7/memsetup.S b/board/impa7/lowlevel_init.S
similarity index 98%
rename from board/impa7/memsetup.S
rename to board/impa7/lowlevel_init.S
index 5cb5fa899d203cb4606fdd1f81d726a424ffcc90..7ce10a20195793f2de6fd23457999f5111e2d6be 100644
--- a/board/impa7/memsetup.S
+++ b/board/impa7/lowlevel_init.S
@@ -39,8 +39,8 @@ memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6
drfpr_val: .long 0x00000081
/* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/*
* DRFPR
* 64kHz DRAM refresh
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
index d1cdc6b9244c1ca3257633671f85cef9cafe2da0..d9b0e2d258a50b125a6cefe2fe9c7434f14f6857 100644
--- a/board/incaip/Makefile
+++ b/board/incaip/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
-SOBJS = memsetup.o
+SOBJS = lowlevel_init.o
$(LIB): .depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/incaip/memsetup.S b/board/incaip/lowlevel_init.S
similarity index 98%
rename from board/incaip/memsetup.S
rename to board/incaip/lowlevel_init.S
index 3f883c110a0e40cf772c491f778ffc04aceb533a..fb64ef419dee4a5a0d89ae879b1fb4f15cf0516e 100644
--- a/board/incaip/memsetup.S
+++ b/board/incaip/lowlevel_init.S
@@ -269,9 +269,9 @@ sdram_init:
.end sdram_init
- .globl memsetup
- .ent memsetup
-memsetup:
+ .globl lowlevel_init
+ .ent lowlevel_init
+lowlevel_init:
/* EBU, CGU and SDRAM Initialization.
*/
@@ -292,4 +292,4 @@ memsetup:
j ra
nop
- .end memsetup
+ .end lowlevel_init
diff --git a/board/innokom/Makefile b/board/innokom/Makefile
index 59eaee58b1cdbe93c2e98cbb983f02ec33649526..73f6a74427950c6c0238c03ce17c10918ad185f0 100644
--- a/board/innokom/Makefile
+++ b/board/innokom/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := innokom.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/csb226/memsetup.S b/board/innokom/lowlevel_init.S
similarity index 98%
rename from board/csb226/memsetup.S
rename to board/innokom/lowlevel_init.S
index 68577ca0699e8d7790ee880f219c19634350caf1..aa9dcba6fc46b4e46a689e83c700d78c95ddd235 100644
--- a/board/csb226/memsetup.S
+++ b/board/innokom/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -46,8 +46,8 @@ _TEXT_BASE:
* Memory setup
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -429,9 +429,9 @@ initclks:
#endif
/* ---------------------------------------------------------------- */
- /* End memsetup */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
-endmemsetup:
+endlowlevel_init:
mov pc, lr
diff --git a/board/lart/Makefile b/board/lart/Makefile
index 42ceb03b7afd3c6737c5ae65f1eb5c9e8687bcfc..550aa1dac3bb8c1e3d39e3717b0af0642d41d47b 100644
--- a/board/lart/Makefile
+++ b/board/lart/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := lart.o flash.o
-SOBJS := flashasm.o memsetup.o
+SOBJS := flashasm.o lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/lart/memsetup.S b/board/lart/lowlevel_init.S
similarity index 98%
rename from board/lart/memsetup.S
rename to board/lart/lowlevel_init.S
index 635f2a001a5afa3d003ba8d8cab3c74d43b73855..db9fd63defce301e29e6b1be84c73ef450d88bb1 100644
--- a/board/lart/memsetup.S
+++ b/board/lart/lowlevel_init.S
@@ -53,8 +53,8 @@ mecr: .long 0x00060006
/* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
ldr r0, MEM_BASE
/* Setup the flash memory */
diff --git a/board/logodl/Makefile b/board/logodl/Makefile
index b635322a81059175cbab3da1c7069358f96e8f4a..c7cde7d57908d6c7be255b137407c296aeddfa13 100644
--- a/board/logodl/Makefile
+++ b/board/logodl/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := logodl.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
diff --git a/board/innokom/memsetup.S b/board/logodl/lowlevel_init.S
similarity index 98%
rename from board/innokom/memsetup.S
rename to board/logodl/lowlevel_init.S
index 68577ca0699e8d7790ee880f219c19634350caf1..aa9dcba6fc46b4e46a689e83c700d78c95ddd235 100644
--- a/board/innokom/memsetup.S
+++ b/board/logodl/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -46,8 +46,8 @@ _TEXT_BASE:
* Memory setup
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -429,9 +429,9 @@ initclks:
#endif
/* ---------------------------------------------------------------- */
- /* End memsetup */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
-endmemsetup:
+endlowlevel_init:
mov pc, lr
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
index f0999d17381f41af25fcac356baca015b3d5f39c..ebe14df1b61e7e705d10186e6845b7c0e6326a07 100644
--- a/board/lpd7a40x/Makefile
+++ b/board/lpd7a40x/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := lpd7a40x.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/lpd7a40x/memsetup.S b/board/lpd7a40x/lowlevel_init.S
similarity index 99%
rename from board/lpd7a40x/memsetup.S
rename to board/lpd7a40x/lowlevel_init.S
index d4e6c6a0e1db4c7e4e7d101d1a387492be66c75f..b3ed55ce35eaee428f8f0ffe01674c4244f30874 100644
--- a/board/lpd7a40x/memsetup.S
+++ b/board/lpd7a40x/lowlevel_init.S
@@ -131,8 +131,8 @@
_TEXT_BASE:
.word TEXT_BASE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r9, lr @ save return address
/* memory control configuration */
diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile
index 0e29e7be7aaabe7e98b6d2801f274b9699fe648d..106622cf58720f3e671e88362a0b74b7004b6ecb 100644
--- a/board/lubbock/Makefile
+++ b/board/lubbock/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := lubbock.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/lubbock/memsetup.S b/board/lubbock/lowlevel_init.S
similarity index 98%
rename from board/lubbock/memsetup.S
rename to board/lubbock/lowlevel_init.S
index dc0b7be024b0b0d0ba467f73a7005b9b55ba7856..15276e89d0195150bc2e1b8e9b65ee96f2a7d5ca 100644
--- a/board/lubbock/memsetup.S
+++ b/board/lubbock/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
* Memory setup
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -403,9 +403,9 @@ initclks:
#endif
/* ---------------------------------------------------------------- */
- /* End memsetup */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
-endmemsetup:
+endlowlevel_init:
mov pc, lr
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
index 7dbcc1c9378025422381b0bbd9fb0409095332ba..ab2c376ff4661042f58d780dfe2c60a6637520e9 100644
--- a/board/modnet50/Makefile
+++ b/board/modnet50/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := modnet50.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
diff --git a/board/modnet50/memsetup.S b/board/modnet50/lowlevel_init.S
similarity index 99%
rename from board/modnet50/memsetup.S
rename to board/modnet50/lowlevel_init.S
index 674b1d2e058bd257adb759c4afed4bd8abf5114e..c98c15545828e9a9c403ffba1fd890eebbe6a760 100644
--- a/board/modnet50/memsetup.S
+++ b/board/modnet50/lowlevel_init.S
@@ -51,8 +51,8 @@
#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1))
/* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
#if defined(CONFIG_MODNET50)
ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE)
@@ -187,7 +187,7 @@ memsetup_cs3:
#endif /* CONFIG_MODNET50 */
-memsetup_end:
+lowlevel_init_end:
/*
* manipulate address in lr and ip to match new
* address space
diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile
index f9b78f947d942bd0d3b83d8450034bafab90b535..304c965d12ba8cfc5dd996a76a56466e9f451636 100644
--- a/board/mpl/vcma9/Makefile
+++ b/board/mpl/vcma9/Makefile
@@ -28,7 +28,7 @@ LIB = lib$(BOARD).a
OBJS := vcma9.o flash.o cmd_vcma9.o
OBJS += ../common/common_util.o ../common/memtst.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/lowlevel_init.S
similarity index 99%
rename from board/mpl/vcma9/memsetup.S
rename to board/mpl/vcma9/lowlevel_init.S
index 98aec3db4dfb75fe2498cd8034633fe1b43b6382..a02335314bb80d234a080cc59e9ef5be59b7cc8e 100644
--- a/board/mpl/vcma9/memsetup.S
+++ b/board/mpl/vcma9/lowlevel_init.S
@@ -130,8 +130,8 @@
_TEXT_BASE:
.word TEXT_BASE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* memory control configuration */
/* make r0 relative the current location so that it */
/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
index 72f850d9cec89c8f3950ee0d14c94b6667271a80..3e805feb404aaeefc70c1b11a2c87dc57d50779e 100644
--- a/board/mx1ads/Makefile
+++ b/board/mx1ads/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := mx1ads.o syncflash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/lowlevel_init.S
similarity index 96%
rename from board/mx1ads/memsetup.S
rename to board/mx1ads/lowlevel_init.S
index 1b06fa3c4d4e733f05ddca1de615951244e0f1cb..09c260d64dce523331cd4d7b831ff0fd4a77dd14 100644
--- a/board/mx1ads/memsetup.S
+++ b/board/mx1ads/lowlevel_init.S
@@ -1,5 +1,5 @@
/*
- * board/mx1ads/memsetup.S
+ * board/mx1ads/lowlevel_init.S
*
* (c) Copyright 2004
* Techware Information Technology, Inc.
@@ -33,8 +33,8 @@
_TEXT_BASE:
.word TEXT_BASE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* memory controller init */
ldr r1, =SDCTL0
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
index 86aef5c3da8fbb5e0a82466ac1249efe320245ef..9e3bca14cd9118be07ce3d5d193b7d575855edc2 100644
--- a/board/mx1fs2/Makefile
+++ b/board/mx1fs2/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := mx1fs2.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
diff --git a/board/mx1fs2/memsetup.S b/board/mx1fs2/lowlevel_init.S
similarity index 99%
rename from board/mx1fs2/memsetup.S
rename to board/mx1fs2/lowlevel_init.S
index 5ec751b73ddce84555136a1a74f70189d6b2948a..8211beb3f88a37c167b352fd759775a89845ab4e 100644
--- a/board/mx1fs2/memsetup.S
+++ b/board/mx1fs2/lowlevel_init.S
@@ -22,8 +22,8 @@
#include <version.h>
#include <asm/arch/imx-regs.h>
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile
index 5fdc874dfe25c2e719dbfb7aa078f3ecb66ece64..95d9170b240658a817918b4c7f947d13a4fbbb36 100644
--- a/board/pleb2/Makefile
+++ b/board/pleb2/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := pleb2.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/pleb2/memsetup.S b/board/pleb2/lowlevel_init.S
similarity index 99%
rename from board/pleb2/memsetup.S
rename to board/pleb2/lowlevel_init.S
index f2e1ce9d431bba9752b0144e9bfeb85af18dd72d..add2c531ab2174140f6eccc0a1c12e5d774bf1d4 100644
--- a/board/pleb2/memsetup.S
+++ b/board/pleb2/lowlevel_init.S
@@ -33,8 +33,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
sub pc,pc,#4
.endm
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -485,4 +485,4 @@ mem_init:
mov pc, r10
-@ End memsetup
+@ End lowlevel_init
diff --git a/board/purple/Makefile b/board/purple/Makefile
index a9463b6215716607151d6cdfc5ff3eba419a82b1..b2f2fc0fd35dcc98098b1f935604dc89159a067a 100644
--- a/board/purple/Makefile
+++ b/board/purple/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o sconsole.o
-SOBJS = memsetup.o
+SOBJS = lowlevel_init.o
$(LIB): .depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/purple/memsetup.S b/board/purple/lowlevel_init.S
similarity index 96%
rename from board/purple/memsetup.S
rename to board/purple/lowlevel_init.S
index d532ceba827e2c5711261a430da6e7ae295a5880..668124a784d1ecd0fff12b50df518f96112c9798 100644
--- a/board/purple/memsetup.S
+++ b/board/purple/lowlevel_init.S
@@ -28,8 +28,8 @@
#define MC_IOGP 0xBF800800
- .globl memsetup
-memsetup:
+ .globl lowlevel_init
+lowlevel_init:
li t0, MC_IOGP
li t1, 0xf24
sw t1, 0(t0)
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index 6263dd005299ec039cf7f2a7ff7ee7d034645ab7..aeea5d475e4b33a3e1157e6d64387f388df0ac75 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -35,7 +35,7 @@ SECTIONS
.text :
{
cpu/mips/start.o (.text)
- board/purple/memsetup.o (.text)
+ board/purple/lowlevel_init.o (.text)
cpu/mips/cache.o (.text)
common/main.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
index 212efcc4e5512d86fa55e9c555c59afa67657017..5dc3fd4e476b004ff2af9213823ced8847ae4c73 100644
--- a/board/scb9328/Makefile
+++ b/board/scb9328/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := scb9328.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
diff --git a/board/scb9328/memsetup.S b/board/scb9328/lowlevel_init.S
similarity index 99%
rename from board/scb9328/memsetup.S
rename to board/scb9328/lowlevel_init.S
index be5650a45f7998163f8619f571e0b8a2309c8c73..ba3b6d241834f12c64e9cb2c5605c3477c01c7bb 100644
--- a/board/scb9328/memsetup.S
+++ b/board/scb9328/lowlevel_init.S
@@ -22,8 +22,8 @@
#include <version.h>
#include <asm/arch/imx-regs.h>
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
diff --git a/board/shannon/Makefile b/board/shannon/Makefile
index 86098a3053a8a35aa0c1b5ebc69aa9dd5e05d792..f66b096a4f7d9039899e248bedb264dda7005731 100644
--- a/board/shannon/Makefile
+++ b/board/shannon/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := shannon.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/shannon/memsetup.S b/board/shannon/lowlevel_init.S
similarity index 98%
rename from board/shannon/memsetup.S
rename to board/shannon/lowlevel_init.S
index a9a8777d3721c9ab6668bfbcf3e56be82784d1b2..0655c42d3be4b53359346c2a1a4277cc1ca1d2f5 100644
--- a/board/shannon/memsetup.S
+++ b/board/shannon/lowlevel_init.S
@@ -51,8 +51,8 @@ mecr: .long 0x7fff7fff @ 01000000
/* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
ldr r0, MEM_BASE
/* Setup the flash memory */
diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile
index 367eabddbfe31f8a72ac05f9b3f8144aa60386ab..fc3d48faeeacf6a5b8385f129dd94554ff51209a 100644
--- a/board/smdk2400/Makefile
+++ b/board/smdk2400/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := smdk2400.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/smdk2400/memsetup.S b/board/smdk2400/lowlevel_init.S
similarity index 99%
rename from board/smdk2400/memsetup.S
rename to board/smdk2400/lowlevel_init.S
index b507d812595c2dbaa30aa7e5ddeb307770128663..a5de806af55c1da20bd9e3c91157d048893cf74a 100644
--- a/board/smdk2400/memsetup.S
+++ b/board/smdk2400/lowlevel_init.S
@@ -125,8 +125,8 @@
_TEXT_BASE:
.word TEXT_BASE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* memory control configuration */
/* make r0 relative the current location so that it */
/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile
index af1e6e677e84da58d8a8c87f7a1ac03fd9e0ab09..4ee21f5977acc6d7c8ee29c3634f7611b0157e3a 100644
--- a/board/smdk2410/Makefile
+++ b/board/smdk2410/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := smdk2410.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/smdk2410/memsetup.S b/board/smdk2410/lowlevel_init.S
similarity index 99%
rename from board/smdk2410/memsetup.S
rename to board/smdk2410/lowlevel_init.S
index c00e772ff898500c19eb59157439c18d01bddb35..310f2a0a94a4ac48099358e86bc04403929cacb1 100644
--- a/board/smdk2410/memsetup.S
+++ b/board/smdk2410/lowlevel_init.S
@@ -129,8 +129,8 @@
_TEXT_BASE:
.word TEXT_BASE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* memory control configuration */
/* make r0 relative the current location so that it */
/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile
index e7bb8cbe50d262c38792334df5b443ee0a3d3470..4375073af9b46e19b0535af570a0f6ae0cc8347f 100644
--- a/board/tb0229/Makefile
+++ b/board/tb0229/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o vr4131-pci.o
-SOBJS = memsetup.o
+SOBJS = lowlevel_init.o
$(LIB): .depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/tb0229/memsetup.S b/board/tb0229/lowlevel_init.S
similarity index 96%
rename from board/tb0229/memsetup.S
rename to board/tb0229/lowlevel_init.S
index 0eaf45dd59f9d4cf029b27da92a84a4d07e8f79c..df318067b931778b0e39395ae94b1ec279264ff2 100644
--- a/board/tb0229/memsetup.S
+++ b/board/tb0229/lowlevel_init.S
@@ -14,8 +14,8 @@
#include <asm/regdef.h>
- .globl memsetup
-memsetup:
+ .globl lowlevel_init
+lowlevel_init:
/* BCUCNTREG1 = 0x0040 */
la t0, 0xaf000000
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 4e6e9d68cb1f5f382343465c2ebca68a831859b2..ced9bc5bc8fd5fe02009536225ad04181392ed3d 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
diff --git a/board/trab/memsetup.S b/board/trab/lowlevel_init.S
similarity index 99%
rename from board/trab/memsetup.S
rename to board/trab/lowlevel_init.S
index c93dff67062f9570ab17819f9ec9ee96e227bfe4..128ae7e4aa55e04d801e5458203b381d2bfcd60f 100644
--- a/board/trab/memsetup.S
+++ b/board/trab/lowlevel_init.S
@@ -140,8 +140,8 @@
_TEXT_BASE:
.word TEXT_BASE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
/* memory control configuration */
/* make r0 relative the current location so that it */
/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile
index 802ccb950fbd252c2ff28e86e9db925a372e2cf1..11ad8fbeccd3e6d11fa03c2763d14408c5f3a4e6 100644
--- a/board/wepep250/Makefile
+++ b/board/wepep250/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := wepep250.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/wepep250/memsetup.S b/board/wepep250/lowlevel_init.S
similarity index 99%
rename from board/wepep250/memsetup.S
rename to board/wepep250/lowlevel_init.S
index 26fc0eaf254fcc4992162778e2cabdbfba66d468..b172ceaa6146f72e937c0917d84dab2677c139f2 100644
--- a/board/wepep250/memsetup.S
+++ b/board/wepep250/lowlevel_init.S
@@ -35,8 +35,8 @@
#include <version.h>
#include <asm/arch/pxa-regs.h>
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile
index da5a5bad3bef4b842117fff6abe569f53a55ccda..7c5f0cd1a1f4d8c9fe1440f976f8d5dd8f082a00 100644
--- a/board/xaeniax/Makefile
+++ b/board/xaeniax/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := xaeniax.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/xaeniax/memsetup.S b/board/xaeniax/lowlevel_init.S
similarity index 98%
rename from board/xaeniax/memsetup.S
rename to board/xaeniax/lowlevel_init.S
index 5c43b85ad410c7add680d0d4de7d1757736d2e48..fe3e7128a4bfd7b41faa80124445bcd909c00619 100644
--- a/board/xaeniax/memsetup.S
+++ b/board/xaeniax/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -39,8 +39,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
.endm
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -416,9 +416,9 @@ test:
#endif
/* ---------------------------------------------------------------- */
- /* End memsetup */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
-endmemsetup:
+endlowlevel_init:
mov pc, lr
diff --git a/board/xm250/Makefile b/board/xm250/Makefile
index 3572f7268370f9c4827d09495c9e88ddb3281916..1b0a3f0178fff944ce67898f103e0abf4aca6d47 100644
--- a/board/xm250/Makefile
+++ b/board/xm250/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := xm250.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
diff --git a/board/xm250/memsetup.S b/board/xm250/lowlevel_init.S
similarity index 99%
rename from board/xm250/memsetup.S
rename to board/xm250/lowlevel_init.S
index f68e8433930da7b55b7a2855916c14e7d593f3ab..2ebd39554a16011b5233aec79ce3de9e1176c27d 100644
--- a/board/xm250/memsetup.S
+++ b/board/xm250/lowlevel_init.S
@@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
.endm
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -516,4 +516,4 @@ mem_init:
mov pc, r10
-@ End memsetup
+@ End lowlevel_init
diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile
index 591b728de15d7649e41b59e35f6c338cb2fcef32..ed1464af3e948ad4e9d7252d0867e41a349e3ba4 100644
--- a/board/xsengine/Makefile
+++ b/board/xsengine/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := xsengine.o flash.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/xsengine/memsetup.S b/board/xsengine/lowlevel_init.S
similarity index 99%
rename from board/xsengine/memsetup.S
rename to board/xsengine/lowlevel_init.S
index b94711846e095b8ef364cf75d030be11fc00029b..309faabd921f327d841e8e918461475e5416a379 100644
--- a/board/xsengine/memsetup.S
+++ b/board/xsengine/lowlevel_init.S
@@ -4,8 +4,8 @@
DRAM_SIZE: .long CFG_DRAM_SIZE
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index bde936a7517201b8d4b4313120609d4e75d90bc0..0e15965df6b2d67b999d64a4e8afb1eaec9c694c 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -316,10 +316,10 @@ cpu_init_crit:
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependent, you will
- * find a memsetup.S in your board directory.
+ * find a lowlevel_init.S in your board directory.
*/
mov ip, lr
- bl memsetup
+ bl lowlevel_init
mov lr, ip
mov pc, lr
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index f3481936425902d27c19bf12b53c8b4adff6a8ec..a7cabf8f32118df690ad5eb0615611b8038c301c 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -257,10 +257,10 @@ cpu_init_crit:
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
- * find a memsetup.S in your board directory.
+ * find a lowlevel_init.S in your board directory.
*/
mov ip, lr
- bl memsetup
+ bl lowlevel_init
mov lr, ip
mov pc, lr
diff --git a/cpu/at91rm9200/lowlevel.S b/cpu/at91rm9200/lowlevel.S
index 030f9e194a89626da111d9c4e95f71d221730df7..c8af7a602aabf83cd049588fb8f1816ace91efee 100644
--- a/cpu/at91rm9200/lowlevel.S
+++ b/cpu/at91rm9200/lowlevel.S
@@ -30,7 +30,7 @@
#include <config.h>
#include <version.h>
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
/*
* some parameters for the board
*
@@ -197,4 +197,4 @@ SMRDATA1:
.word SDRAM
.word SDRAM_VAL
/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S
index 0dbc0094a4a2a17350272e35e515a94cf62a6486..e897e6b9c9091f5dd3ca47b76af25226982f6ec8 100644
--- a/cpu/at91rm9200/start.S
+++ b/cpu/at91rm9200/start.S
@@ -115,7 +115,7 @@ reset:
orr r0,r0,#0xd3 /* was 13 */
msr cpsr,r0
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
/* scratch stack */
ldr r1, =0x00204000
/* Insure word alignment */
@@ -141,7 +141,7 @@ reset:
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
orr r0, r0, #0xC0000000 @ set bits 31:30 (iA, nF)
mcr p15, 0, r0, c1, c0, 0 @ write r0 in cp15 control register (cp15 r1)
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
/*
* relocate exeception table
*/
@@ -160,9 +160,7 @@ copyex:
*/
#ifdef CONFIG_INIT_CRITICAL
bl cpu_init_crit
-#endif
-#ifdef CONFIG_BOOTBINFUNC
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
@@ -179,7 +177,7 @@ copy_loop:
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
/* Set up the stack */
stack_setup:
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
index 4f023a59fe9c7fffa33f47324e374a7f26b4b0da..5dca77363f9a84a148a4e51947d8513dbc98cb32 100644
--- a/cpu/lh7a40x/start.S
+++ b/cpu/lh7a40x/start.S
@@ -229,10 +229,10 @@ cpu_init_crit:
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
- * find a memsetup.S in your board directory.
+ * find a lowlevel_init.S in your board directory.
*/
mov ip, lr
- bl memsetup
+ bl lowlevel_init
mov lr, ip
mov pc, lr
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 45a90a80fae3955d8ba0b9e0938007c8a3504bc1..ff105a418401c953cd817ef8b1e42eeec30c7d23 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -243,7 +243,7 @@ reset:
/* Initialize any external memory.
*/
- bal memsetup
+ bal lowlevel_init
nop
/* Initialize caches...
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index d74f41ff383d822e67c67a5b38c34c124a8f6b25..da753a18dac62ecc9779bfb94bc03a55a5653f9a 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -218,10 +218,10 @@ setspeed_done:
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
- * find a memsetup.S in your board directory.
+ * find a lowlevel_init.S in your board directory.
*/
mov ip, lr
- bl memsetup
+ bl lowlevel_init
mov lr, ip
/* Memory interfaces are working. Disable MMU and enable I-cache. */
diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S
index b4b7c3f62cec4ba761989c5abd67fa87fe1e752c..fc7f59228ad673bd61a70871f7433b19f17294db 100644
--- a/cpu/s3c44b0/start.S
+++ b/cpu/s3c44b0/start.S
@@ -117,9 +117,9 @@ reset:
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
- * find a memsetup.S in your board directory.
+ * find a lowlevel_init.S in your board directory.
*/
- bl memsetup
+ bl lowlevel_init
#endif
relocate: /* relocate U-Boot to RAM */
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
index 797434407055c3ba7b15824c3d0c017a5690fecc..08e41c7d793042d695388b78ee36b1039a9288a3 100644
--- a/cpu/sa1100/start.S
+++ b/cpu/sa1100/start.S
@@ -213,10 +213,10 @@ cpu_init_crit:
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
- * find a memsetup.S in your board directory.
+ * find a lowlevel_init.S in your board directory.
*/
mov ip, lr
- bl memsetup
+ bl lowlevel_init
mov lr, ip
/*
diff --git a/doc/README.modnet50 b/doc/README.modnet50
index d8d9c9d8210b85b57a7c161cfac589a47ad3569e..30338ce8cc74cde0c1ae7cb91b4d636193dccdd5 100644
--- a/doc/README.modnet50
+++ b/doc/README.modnet50
@@ -47,7 +47,7 @@ Files:
cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
-board/modnet50/memsetup.S .. memory setup for ModNET50
+board/modnet50/lowlevel_init.S .. memory setup for ModNET50
board/modnet50/flash.c .. flash routines
board/modnet50/modnet50.c .. some board init stuff
diff --git a/include/configs/B2.h b/include/configs/B2.h
index 2fc97b27c2e2b5da611d498032b396d4e5c997a3..b031826f3f9d31fee97ae8dcc8b6ca432c39e880 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -34,7 +34,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index de7f387817ff76f38fbd6c5a21c2776e2cf1b3ea..7c51a1b040ff50cc15e87f7d0b66d9fafd9c549b 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -27,7 +27,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 9ca80ab6707d1e8f8ea0b0efaeb0755fd54290e6..2c664d5936609790c5fa747c6b258b457cbfd495 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -33,7 +33,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 8146fe723d61c5480ebf98bd983496db613704d7..d32ec34fc2a708431864581d910d8fbc4970240b 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -29,7 +29,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
@@ -44,10 +44,7 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-/* define this to include the functionality of boot.bin in u-boot */
-#undef CONFIG_BOOTBINFUNC
-
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
#define CFG_USE_MAIN_OSCILLATOR 1
/* flash */
#define MC_PUIA_VAL 0x00000000
@@ -77,7 +74,7 @@
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif
+#endif /* CONFIG_INIT_CRITICAL */
/*
* Size of malloc() pool
*/
@@ -180,19 +177,19 @@
#define CFG_ENV_SIZE 0x2000 /* 0x8000 */
#else
#define CFG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */
#else
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
#define CFG_ENV_SIZE 0x2000 /* 0x8000 */
-#endif
-#endif
+#endif /* CONFIG_INIT_CRITICAL */
+#endif /* CFG_ENV_IS_IN_DATAFLASH */
#define CFG_LOAD_ADDR 0x21000000 /* default load address */
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */
#define CFG_U_BOOT_BASE PHYS_FLASH_1
#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */
@@ -200,7 +197,7 @@
#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */
#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-#endif
+#endif /* CONFIG_INIT_CRITICAL */
#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 34efc384b917d98a2d5b2507dbb7d6120f812d81..5a0f460e68be038fde1b8421f0f5223f814da744 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -29,7 +29,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */
@@ -44,15 +44,7 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-/* define this to include the functionality of boot.bin in u-boot */
-#define CONFIG_BOOTBINFUNC
-
-/* just to make sure */
-#ifndef CONFIG_BOOTBINFUNC
-#define CONFIG_BOOTBINFUNC
-#endif
-
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
#define CFG_USE_MAIN_OSCILLATOR 1
/* flash */
#define MC_PUIA_VAL 0x00000000
@@ -82,7 +74,7 @@
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif
+#endif /* CONFIG_INIT_CRITICAL */
/*
* Size of malloc() pool
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 2cec4c7c513ae8be85cdff988547e2399811dff1..ca7a97b5628bad13d879c99b870cd5a4a3b11c84 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -32,7 +32,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
@@ -306,7 +306,7 @@
#else
#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
#define CFG_MDMRS_VAL 0x00000000
-#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in memsetup.S */
+#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */
#endif
/*
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index 1b39d23c884e38e22ef525e07a35a1d5e503e984..0b2b251baeba3752fd8481ea531b5fcf6cedb87c 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -37,7 +37,7 @@
* If we are developing, we might want to start U-Boot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index f3a871bda3f8d3df608325ba646fc8e5a35c9770..b14e35b6288613d947b0c09f0f9fc6b11c4d7eba 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -31,8 +31,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
-#undef CONFIG_INIT_CRITICAL /* undef for developing */
+#undef CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index d9dd620c1ca851627d54e82ec0e3bd29cee5c062..41ad3943e1c2b5da9796ed97c375afb572047a7b 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -31,7 +31,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 24b1779b4cd7135c0d233865c5a042d8158a6c85..9e0ed51fa4852b32f39ff1fbeaf720c15d70a8cd 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -33,7 +33,7 @@
* Also swap the flash1 and flash2 addresses during debug.
*
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index 618b25ae2df9dfecaa8e8b4b20370563c0e9f606..dbb8dec85dcf7f16ad07f66174129db7de3c64ac 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -38,7 +38,7 @@
* e.g. bootp/tftp download of the kernel is a far more convenient
* when testing new kernels on this target. However the ADS GCPlus Linux
* boot ROM leaves the MMU enabled when it passes control to U-Boot. So
- * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem.
+ * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem.
*/
#define CONFIG_INIT_CRITICAL
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index b4c1edfa3dc6e22b2f5a4c5561a26637676c3a82..dbc951de65e4cedbf4d362dd380198c69b3b9e9e 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -31,7 +31,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index f8845192218414f0427812689d4809f98cf450c2..a3d36a0d8f0c70f78cb6cd37a0713f6a7a920882 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -34,7 +34,7 @@
* If we are developing, we might want to start U-Boot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 1add778e5fe612a18418243d441998bece32c038..a8067f6ef2ae5ad756e4fe31acbdf9f3242097a4 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -41,7 +41,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
diff --git a/include/configs/lart.h b/include/configs/lart.h
index c98f3777ca2f704c8fe8103361474f760c29be21..3c9895ab27e82fc043169e1e55c7142c96055e76 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -31,7 +31,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index 2aee461fdd88eb6eb90507fc25d158397af9eb4c..b320a4050dfeb6aac407fa81236e77dfd463fb14 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -34,7 +34,7 @@
* If we are developing, we might want to start U-Boot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
index 808fe1c7b0976cf5e7c11904eb1f61a05dccacdc..6f2c32c5469fa17175940280647df577f777e348 100644
--- a/include/configs/lpd7a400.h
+++ b/include/configs/lpd7a400.h
@@ -27,7 +27,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
#undef CONFIG_USE_IRQ
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
index de465ea368cef7738af74e44b6d945ff125617a4..e6855fb1ef36e83af502468aee616f3be11be8d1 100644
--- a/include/configs/lpd7a404.h
+++ b/include/configs/lpd7a404.h
@@ -27,7 +27,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
#undef CONFIG_USE_IRQ
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index efe205de4cad691928f01939f630a5dd1d2867e6..536a175bd6584f9f9b848cc94fd508b5f97b3f87 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -34,7 +34,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index fd1b47c4fc41753850e9717e7b1a7e700a206745..166aa1180cf95def0b65cfc4fc6e09e5c2faa2f7 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -31,7 +31,7 @@
* If we are developing, we might want to start u-boot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 3f1419e5ab51661fe3e18c11f90ddb3a888becfd..f7ccea3d45ee54ecf68ffa811b82bd0d7cb3a7e5 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -32,7 +32,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index 11d21b20d19da5353535782ea1a147813966b464..af39e2e88d4cf59e949e9772e632f29be14451cd 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -31,7 +31,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 88d6c462b431d317ab7c9b2338ec9653f846cfeb..552beedc5cff46c4981d4f5002c08e98151548b1 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -30,7 +30,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index beff6d89d71a0a4040269853abd64c78fd9dfdb1..9b822152c2488accc975dbfd85e40c784baf67e1 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -30,7 +30,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index d0608ddef947135e5d23c14b5d2ba178c8be7062..c00976efd14f0d07a8da80469957018e821e9620 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -30,7 +30,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 43be807f6a5f0cd918d8cfc4c306b29bfe085d50..cd2dbf18b821674f6a8fad7090522de5be42b1e5 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -30,8 +30,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-
-#define CONFIG_INIT_CRITICAL /*undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index ace380fe2f00ce456905765ed06566458bc1f2c3..1bdea6c5ab77ea7bdf5d57562f8c62daa9620adc 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -32,7 +32,7 @@
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index f7338034b74725f3791f935eb200a2369fbd4ccd..9ba19c850684b3e370e6994e9085ec562bca7924 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -34,7 +34,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
@@ -208,8 +208,8 @@
#define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM.
tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
-#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual
- bits set in memsetup.S */
+#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual */
+ /* bits set in lowlevel_init.S */
#define CFG_MDMRS_VAL 0x00000000
/*
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 7afe62d7cc1f0f8fd3f9048df406345b51b8aa3a..8a4e3709b14165c92703c9379476c078279332c1 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -37,7 +37,7 @@
* bring us to live
*/
#define CONFIG_INFERNO /* we are using the inferno bootldr */
-#undef CONFIG_INIT_CRITICAL /* undef for developing */
+#undef CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index b95b8c073c8dd8848ee39e72ed30f7cc9b3c5c20..f477575be8df2c49bed6f675d4cb97d1ee316cbe 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -34,7 +34,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 7e3a02d29baccf473fb9af070ae5456771124bf9..2a1cd7707a52ee17733d0967ec7b87fd373236c0 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -33,7 +33,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index e8c437364fcf765a17e618b94e1e4d3c74e32ba8..6fda7b96fd503c43622d337b334813a278bf7f34 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -29,7 +29,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 137d9346773f819147b57f458606e43eee7311ac..2f59260564428162cc3da6d275ef8c2e125345f4 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -40,7 +40,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index a8a8ee535cdc7708e714b0bb761356ce5c37a2db..ca32efb3c45a440bdae1823766ee1c6d556f1c16 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -27,7 +27,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
#define CONFIG_PXA250 1 /* this is an PXA250 CPU */
#define CONFIG_WEPEP250 1 /* config for wepep250 board */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index fc3739f41d553c32e57035916ac7d35c177a5edd..1177003c801e74d47bc4c7e184c22bdf68846d47 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -40,7 +40,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
#undef CONFIG_INIT_CRITICAL
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 10f69d998e038ad99fc63a0f6c5d330dba66c030..1be7dd46a7df35a5b219f33d7d3338b438f654e9 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -32,7 +32,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/*
* High Level Configuration Options
@@ -330,7 +330,7 @@
#define CFG_MSC2_VAL 0x35f435fc /* IDE / BCR + WatchDog (cs4)/(cS5) */
#define CFG_MDCNFG_VAL 0x000009c9
#define CFG_MDMRS_VAL 0x00220022
-#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in memsetup.S */
+#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */
/*
* PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 87d2c942d7607053339a6dcf28c753be3bd08f8a..6b15766daa2a94805b7f3c65051ee64e4c9ac286 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -32,7 +32,7 @@
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#define CONFIG_INIT_CRITICAL
/* High Level Configuration Options */
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */