From 0c8721a466b5e0eca7e7fbe1007777fa82100541 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.(none)>
Date: Fri, 23 Sep 2005 11:05:55 +0200
Subject: [PATCH] Cleanup (PPC4xx is AMCC now)
---
CHANGELOG | 2 +
CREDITS | 4 +-
README | 4 +-
board/MAI/AmigaOneG3SE/ps2kbd.c | 2 +-
board/amcc/ocotea/config.mk | 2 +-
board/dave/PPChameleonEVB/PPChameleonEVB.c | 4 +-
board/eric/eric.c | 14 +--
board/esd/ocrtc/cmd_ocrtc.c | 6 +-
board/mpl/common/kbd.c | 2 +-
board/mpl/common/pci_parts.h | 4 +-
board/w7o/fpga.c | 32 +++---
board/w7o/w7o.c | 16 +--
board/w7o/w7o.h | 12 +--
common/cmd_dcr.c | 120 +++++++++++----------
cpu/ppc4xx/4xx_enet.c | 2 +-
cpu/ppc4xx/bedbug_405.c | 2 +-
cpu/ppc4xx/serial.c | 2 +-
cpu/ppc4xx/spd_sdram.c | 6 +-
cpu/ppc4xx/start.S | 2 +-
doc/I2C_Edge_Conditions | 2 +-
doc/README.bedbug | 4 +-
doc/README.ebony | 4 +-
doc/README.ml300 | 2 +-
doc/README.mpc85xxads | 2 +-
doc/README.ocotea | 6 +-
doc/README.ocotea-PIBS-to-U-Boot | 4 +-
doc/README.ppc440 | 2 +-
drivers/pc_keyb.c | 2 +-
include/asm-ppc/processor.h | 4 +-
include/asm-ppc/u-boot.h | 2 +-
include/configs/ADCIOP.h | 2 +-
include/configs/APC405.h | 2 +-
include/configs/AR405.h | 2 +-
include/configs/ASH405.h | 2 +-
include/configs/CANBT.h | 2 +-
include/configs/CATcenter.h | 2 +-
include/configs/CPCI2DP.h | 2 +-
include/configs/CPCI405.h | 2 +-
include/configs/CPCI4052.h | 2 +-
include/configs/CPCI405AB.h | 2 +-
include/configs/CPCI405DT.h | 2 +-
include/configs/CPCI440.h | 2 +-
include/configs/CPCIISER4.h | 2 +-
include/configs/DASA_SIM.h | 2 +-
include/configs/DP405.h | 2 +-
include/configs/DU405.h | 2 +-
include/configs/ERIC.h | 2 +-
include/configs/G2000.h | 2 +-
include/configs/HH405.h | 2 +-
include/configs/HUB405.h | 2 +-
include/configs/JSE.h | 2 +-
include/configs/KAREF.h | 2 +-
include/configs/METROBOX.h | 2 +-
include/configs/MIP405.h | 2 +-
include/configs/ML2.h | 2 +-
include/configs/OCRTC.h | 2 +-
include/configs/ORSG.h | 2 +-
include/configs/PCI405.h | 2 +-
include/configs/PIP405.h | 2 +-
include/configs/PLU405.h | 2 +-
include/configs/PMC405.h | 2 +-
include/configs/PPChameleonEVB.h | 2 +-
include/configs/VOH405.h | 2 +-
include/configs/VOM405.h | 2 +-
include/configs/W7OLMC.h | 2 +-
include/configs/W7OLMG.h | 2 +-
include/configs/WUH405.h | 2 +-
include/configs/XPEDITE1K.h | 4 +-
include/configs/bamboo.h | 2 +-
include/configs/bubinga.h | 2 +-
include/configs/csb272.h | 2 +-
include/configs/csb472.h | 2 +-
include/configs/ebony.h | 4 +-
include/configs/ml300.h | 2 +-
include/configs/ocotea.h | 4 +-
include/configs/sbc405.h | 2 +-
include/configs/walnut.h | 2 +-
include/configs/yellowstone.h | 2 +-
include/configs/yosemite.h | 2 +-
include/watchdog.h | 2 +-
80 files changed, 191 insertions(+), 187 deletions(-)
diff --git a/CHANGELOG b/CHANGELOG
index 863759c49a..624e44941f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
Changes for U-Boot 1.1.4:
======================================================================
+* Cleanup (PPC4xx is AMCC now)
+
* esd CPCI2DP board added
Patch by Matthias Fuchs, 22 Sep 2005
diff --git a/CREDITS b/CREDITS
index f717d54a9e..88e17b6e1e 100644
--- a/CREDITS
+++ b/CREDITS
@@ -340,7 +340,7 @@ W: http://www.windriver.com
N: Stefan Roese
E: stefan.roese@esd-electronics.com
-D: IBM PPC401/403/405GP Support; Windows environment support
+D: AMCC PPC401/403/405GP Support; Windows environment support
N: Erwin Rol
E: erwin@muffin.org
@@ -356,7 +356,7 @@ D: Author of LiMon-1.4.2, which contributed some ideas
N: Travis B. Sawyer
E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board. IBM 440gx Ref Platform (Ocotea)
+D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea)
N: Paolo Scaffardi
E: arsenio@tin.it
diff --git a/README b/README
index f3ed4aa5ec..e3d053717c 100644
--- a/README
+++ b/README
@@ -145,7 +145,7 @@ Directory Hierarchy:
- mpc85xx Files specific to Freescale MPC85xx CPUs
- nios Files specific to Altera NIOS CPUs
- nios2 Files specific to Altera Nios-II CPUs
- - ppc4xx Files specific to IBM PowerPC 4xx CPUs
+ - ppc4xx Files specific to AMCC PowerPC 4xx CPUs
- pxa Files specific to Intel XScale PXA CPUs
- s3c44b0 Files specific to Samsung S3C44B0 CPUs
- sa1100 Files specific to Intel StrongARM SA1100 CPUs
@@ -497,7 +497,7 @@ The following options need to be configured:
- Console UART Number:
CONFIG_UART1_CONSOLE
- IBM PPC4xx only.
+ AMCC PPC4xx only.
If defined internal UART1 (and not UART0) is used
as default U-Boot console.
diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c
index bfe5eb3ed7..cf4f4d0e3d 100644
--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@@ -656,7 +656,7 @@ char * kbd_initialize(void)
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
- /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
diff --git a/board/amcc/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 5543a4eabd..9e1833591a 100644
--- a/board/amcc/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
@@ -22,7 +22,7 @@
#
#
-# IBM 440GX Reference Platform (Ocotea) board
+# AMCC 440GX Reference Platform (Ocotea) board
#
#TEXT_BASE = 0xFFFE0000
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 1f6512d0ea..b425d63967 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -279,10 +279,10 @@ void video_get_info_str (int line_number, char *info)
case 1:
switch (pvr) {
case PVR_405EP_RB:
- sprintf (info, " IBM PowerPC 405EP Rev. B");
+ sprintf (info, " AMCC PowerPC 405EP Rev. B");
break;
default:
- sprintf (info, " IBM PowerPC 405EP Rev. <unknown>");
+ sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
break;
}
return;
diff --git a/board/eric/eric.c b/board/eric/eric.c
index 860e5064b8..02fe8dcfbd 100644
--- a/board/eric/eric.c
+++ b/board/eric/eric.c
@@ -26,10 +26,10 @@
#include "eric.h"
#include <asm/processor.h>
-#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */
-#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
-#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
-#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */
+#define PPC405GP_GPIO0_OR 0xef600700 /* GPIO Output */
+#define PPC405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
+#define PPC405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
+#define PPC405GP_GPIO0_IR 0xef60071c /* GPIO Input */
int board_early_init_f (void)
{
@@ -50,7 +50,7 @@ int board_early_init_f (void)
| IRQ 30 (EXT IRQ 5) PCI INTB#; active low; level sensitive
| IRQ 31 (EXT IRQ 6) PCI INTA#; active low; level sensitive
| -> IRQ6 Pin is NOW GPIO23 and can be activateted by setting
- | IBM405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in IBM405GP_GPIO0_OR,
+ | PPC405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in PPC405GP_GPIO0_OR,
| else tristate)
| Note for ERIC board:
| An interrupt taken for the HOST (IRQ 28) indicates that
@@ -70,8 +70,8 @@ int board_early_init_f (void)
mtdcr (cntrl0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
- out32 (IBM405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
- out32 (IBM405GP_GPIO0_TCR, 0x7E400000);
+ out32 (PPC405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
+ out32 (PPC405GP_GPIO0_TCR, 0x7E400000);
return 0;
}
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
index 881d1799f0..e113d5cab6 100644
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ b/board/esd/ocrtc/cmd_ocrtc.c
@@ -29,8 +29,8 @@
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#define IBM_VENDOR_ID 0x1014
-#define PPC405_DEVICE_ID 0x0156
+#define AMCC_VENDOR_ID 0x1014
+#define PPC405_DEVICE_ID 0x0156
/*
@@ -43,7 +43,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
u32 addr;
while (bdf >= 0) {
- if ((bdf = pci_find_device(IBM_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
+ if ((bdf = pci_find_device(AMCC_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
break;
}
printf("Found device nr %d at %x!\n", idx-1, bdf);
diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c
index 9bd1ff94d4..7724e241d1 100644
--- a/board/mpl/common/kbd.c
+++ b/board/mpl/common/kbd.c
@@ -613,7 +613,7 @@ char * kbd_initialize(void)
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
- /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index a57b121561..60008e2b24 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -137,7 +137,7 @@ static struct pci_pip405_config_entry piix4_pmm_cntrl_f3[] = {
{ } /* end of device table */
};
/* PPC405 Dummy only used to prevent autosetup on this host bridge */
-static struct pci_pip405_config_entry ibm405_dummy[] = {
+static struct pci_pip405_config_entry ppc405_dummy[] = {
{ } /* end of device table */
};
@@ -150,7 +150,7 @@ static struct pci_config_table pci_pip405_config_table[]={
PCI_DEVICE_ID_IBM_405GP,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID, 0,
- pci_pip405_write_regs, {(unsigned long) ibm405_dummy}},
+ pci_pip405_write_regs, {(unsigned long) ppc405_dummy}},
{PCI_VENDOR_ID_INTEL, /* PIIX4 ISA Bridge Function 0 */
PCI_DEVICE_ID_INTEL_82371AB_0,
diff --git a/board/w7o/fpga.c b/board/w7o/fpga.c
index 97af924294..336bfbaccc 100644
--- a/board/w7o/fpga.c
+++ b/board/w7o/fpga.c
@@ -77,17 +77,17 @@ fpgaDownload(unsigned char *saddr,
dest = (unsigned short *)daddr;
/* Get DCR output register */
- grego = in32(IBM405GP_GPIO0_OR);
+ grego = in32(PPC405GP_GPIO0_OR);
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/* Setup timeout timer */
start = get_timer(0);
/* Wait for FPGA init line */
- while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
+ while(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
/* Check for timeout - 100us max, so use 3ms */
if (get_timer(start) > 3) {
printf(" failed to start init.\n");
@@ -100,10 +100,10 @@ fpgaDownload(unsigned char *saddr,
/* Unreset FPGA */
grego |= GPIO_XCV_PROG; /* PROG line high */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/* Wait for FPGA end of init period . */
- while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
+ while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
/* Check for timeout */
if (get_timer(start) > 3) {
@@ -112,7 +112,7 @@ fpgaDownload(unsigned char *saddr,
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
goto done;
}
@@ -127,18 +127,18 @@ fpgaDownload(unsigned char *saddr,
mtdcr(CPC0_CR0, greg); /* ... just do it */
/* turn on open drain for CNFG */
- greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
+ greg = in32(PPC405GP_GPIO0_ODR); /* get open drain register */
greg |= cnfg; /* CNFG open drain */
- out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
+ out32(PPC405GP_GPIO0_ODR, greg); /* .. just do it */
/* Turn output enable on for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
greg |= cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+ out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */
/* Setup FPGA for programming */
grego &= ~cnfg; /* CONFIG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/*
* Program the FPGA
@@ -149,12 +149,12 @@ fpgaDownload(unsigned char *saddr,
/* Done programming */
grego |= cnfg; /* CONFIG line high */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/* Turn output enable OFF for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
greg &= ~cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+ out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */
/* Toggle IRQ/GPIO */
greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
@@ -180,7 +180,7 @@ fpgaDownload(unsigned char *saddr,
start = get_timer(0);
/* Wait for FPGA end of programming period . */
- while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
+ while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
/* Check for timeout */
if (get_timer(start) > 3) {
@@ -189,7 +189,7 @@ fpgaDownload(unsigned char *saddr,
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
goto done;
}
diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
index 1e3ceb20d6..daf7f53fcd 100644
--- a/board/w7o/w7o.c
+++ b/board/w7o/w7o.c
@@ -47,9 +47,9 @@ int board_early_init_f (void)
/*
* Setup GPIO pins - reset devices.
*/
- out32 (IBM405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
- out32 (IBM405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
- out32 (IBM405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
+ out32 (PPC405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
+ out32 (PPC405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
+ out32 (PPC405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
@@ -78,9 +78,9 @@ int board_early_init_f (void)
/*
* Setup GPIO pins
*/
- out32 (IBM405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
- out32 (IBM405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
- out32 (IBM405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
+ out32 (PPC405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
+ out32 (PPC405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
+ out32 (PPC405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
@@ -238,14 +238,14 @@ int misc_init_r (void)
#if defined(CONFIG_W7OLMG)
unsigned long greg; /* GPIO Register */
- greg = in32 (IBM405GP_GPIO0_OR);
+ greg = in32 (PPC405GP_GPIO0_OR);
/*
* XXX - Unreset devices - this should be moved into VxWorks driver code
*/
greg |= 0x41800000L; /* SAM, PHY, Galileo */
- out32 (IBM405GP_GPIO0_OR, greg); /* set output pins to default */
+ out32 (PPC405GP_GPIO0_OR, greg); /* set output pins to default */
#endif /* CONFIG_W7OLMG */
/*
diff --git a/board/w7o/w7o.h b/board/w7o/w7o.h
index 84581664e8..d6f50e2e67 100644
--- a/board/w7o/w7o.h
+++ b/board/w7o/w7o.h
@@ -25,13 +25,13 @@
#define _W7O_H_
#include <config.h>
-/* IBM 405GP PowerPC GPIO registers */
-#define IBM405GP_GPIO0_OR 0xef600700L /* GPIO Output */
-#define IBM405GP_GPIO0_TCR 0xef600704L /* GPIO Three-State Control */
-#define IBM405GP_GPIO0_ODR 0xef600718L /* GPIO Open Drain */
-#define IBM405GP_GPIO0_IR 0xef60071cL /* GPIO Input */
+/* AMCC 405GP PowerPC GPIO registers */
+#define PPC405GP_GPIO0_OR 0xef600700L /* GPIO Output */
+#define PPC405GP_GPIO0_TCR 0xef600704L /* GPIO Three-State Control */
+#define PPC405GP_GPIO0_ODR 0xef600718L /* GPIO Open Drain */
+#define PPC405GP_GPIO0_IR 0xef60071cL /* GPIO Input */
-/* IBM 405GP DCRs */
+/* AMCC 405GP DCRs */
#define CPC0_CR0 0xb1 /* Chip control register 0 */
/* LMG FPGA <=> CPU GPIO signals */
diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c
index 3e4e08f95b..5842471df1 100644
--- a/common/cmd_dcr.c
+++ b/common/cmd_dcr.c
@@ -22,7 +22,7 @@
*/
/*
- * IBM 4XX DCR Functions
+ * AMCC 4XX DCR Functions
*/
#include <common.h>
@@ -31,89 +31,91 @@
#if defined(CONFIG_4xx) && (CONFIG_COMMANDS & CFG_CMD_SETGETDCR)
-/* ======================================================================
- * Interpreter command to retrieve an IBM PPC 4xx Device Control Register
- * ======================================================================
+/* =======================================================================
+ * Interpreter command to retrieve an AMCC PPC 4xx Device Control Register
+ * =======================================================================
*/
int do_getdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
- unsigned short dcrn; /* Device Control Register Num */
- unsigned long value; /* DCR's value */
+ unsigned short dcrn; /* Device Control Register Num */
+ unsigned long value; /* DCR's value */
- unsigned long get_dcr(unsigned short);
+ unsigned long get_dcr (unsigned short);
- /* Validate arguments */
- if (argc < 2) {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ /* Validate arguments */
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
- /* Get a DCR */
- dcrn = (unsigned short)simple_strtoul(argv[ 1 ], NULL, 16);
- value = get_dcr(dcrn);
+ /* Get a DCR */
+ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16);
+ value = get_dcr (dcrn);
- printf("%04x: %08lx\n", dcrn, value);
+ printf ("%04x: %08lx\n", dcrn, value);
- return 0;
-} /* do_getdcr */
+ return 0;
+}
/* ======================================================================
- * Interpreter command to set an IBM PPC 4xx Device Control Register
+ * Interpreter command to set an AMCC PPC 4xx Device Control Register
* ======================================================================
*/
-int do_setdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_setdcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- unsigned long get_dcr(unsigned short );
- unsigned long set_dcr(unsigned short , unsigned long );
- unsigned short dcrn; /* Device Control Register Num */
- unsigned long value;
- /* DCR's value */
- int nbytes;
- extern char console_buffer[];
-
- /* Validate arguments */
- if (argc < 2) {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- /* Set a DCR */
- dcrn = (unsigned short)simple_strtoul(argv[1], NULL, 16);
- do {
- value = get_dcr(dcrn);
- printf("%04x: %08lx", dcrn, value);
- nbytes = readline(" ? ");
- if (nbytes == 0) {
- /*
- * <CR> pressed as only input, don't modify current
- * location and exit command.
- */
- nbytes = 1;
- return 0;
- } else {
- unsigned long i;
- char *endp;
- i = simple_strtoul(console_buffer, &endp, 16);
- nbytes = endp - console_buffer;
- if (nbytes)
- set_dcr(dcrn, i);
+ unsigned long get_dcr (unsigned short);
+ unsigned long set_dcr (unsigned short, unsigned long);
+ unsigned short dcrn; /* Device Control Register Num */
+ unsigned long value;
+
+ /* DCR's value */
+ int nbytes;
+ extern char console_buffer[];
+
+ /* Validate arguments */
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
}
- } while (nbytes);
- return 0;
-} /* do_setdcr */
+ /* Set a DCR */
+ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16);
+ do {
+ value = get_dcr (dcrn);
+ printf ("%04x: %08lx", dcrn, value);
+ nbytes = readline (" ? ");
+ if (nbytes == 0) {
+ /*
+ * <CR> pressed as only input, don't modify current
+ * location and exit command.
+ */
+ nbytes = 1;
+ return 0;
+ } else {
+ unsigned long i;
+ char *endp;
+
+ i = simple_strtoul (console_buffer, &endp, 16);
+ nbytes = endp - console_buffer;
+ if (nbytes)
+ set_dcr (dcrn, i);
+ }
+ } while (nbytes);
+
+ return 0;
+}
/***************************************************/
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
- "getdcr - Get an IBM PPC 4xx DCR's value\n",
+ "getdcr - Get an AMCC PPC 4xx DCR's value\n",
"dcrn - return a DCR's value.\n"
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
- "setdcr - Set an IBM PPC 4xx DCR's value\n",
+ "setdcr - Set an AMCC PPC 4xx DCR's value\n",
"dcrn - set a DCR's value.\n"
);
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 79be865345..4809026134 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -90,7 +90,7 @@
#include "vecnum.h"
/*
- * Only compile for platform with IBM/AMCC EMAC ethernet controller and
+ * Only compile for platform with AMCC EMAC ethernet controller and
* network support enabled.
* Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
*/
diff --git a/cpu/ppc4xx/bedbug_405.c b/cpu/ppc4xx/bedbug_405.c
index 23752f3940..a3c2119764 100644
--- a/cpu/ppc4xx/bedbug_405.c
+++ b/cpu/ppc4xx/bedbug_405.c
@@ -25,7 +25,7 @@ int bedbug405_clear __P ((int));
/* ======================================================================
- * Initialize the global bug_ctx structure for the IBM PPC405. Clear all
+ * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
* of the breakpoints.
* ====================================================================== */
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 8cf7dab3a2..e06fb0d44b 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -320,7 +320,7 @@ int serial_tstc ()
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
-#error "External serial clock not supported on IBM PPC405EP!"
+#error "External serial clock not supported on AMCC PPC405EP!"
#endif
#define UART_RBR 0x00
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index 3b7125dc57..48102efcff 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -14,7 +14,7 @@
*
* (C) Copyright 2002
* Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for IBM 440 based on OpenBIOS draminit.c from IBM.
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
@@ -108,7 +108,7 @@ int spd_read(uint addr);
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
- * This works on boards that has the same schematics that the IBM walnut has.
+ * This works on boards that has the same schematics that the AMCC walnut has.
*
* Input: null for default I2C spd functions or a pointer to a custom function
* returning spd_data.
@@ -696,7 +696,7 @@ long program_bxcr(unsigned long* dimm_populated,
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
- * This works on boards that has the same schematics that the IBM walnut has.
+ * This works on boards that has the same schematics that the AMCC walnut has.
*
* BUG: Don't handle ECC memory
* BUG: A few values in the TR register is currently hardcoded
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 003c5b6bf1..f434e207d9 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -42,7 +42,7 @@
/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
/*------------------------------------------------------------------------------- */
-/* U-Boot - Startup Code for IBM 4xx PowerPC based Embedded Boards
+/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
*
*
* The processor starts at 0xfffffffc and the code is executed
diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions
index be7f1bee1f..44d3478549 100644
--- a/doc/I2C_Edge_Conditions
+++ b/doc/I2C_Edge_Conditions
@@ -28,7 +28,7 @@ I2C Edge Conditions:
Notes
-----
-!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!!
+!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!!
This reset edge condition could possibly be present in every I2C
controller and device available. For boards where a I2C bus reset
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 56aeb090c1..9cfb4217fe 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -2,7 +2,7 @@ BEDBUG Support for U-Boot
--------------------------
These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot.
-A specific implementation is made for the IBM405 processor but other flavors
+A specific implementation is made for the AMCC 405 processor but other flavors
can be easily implemented.
#####################
@@ -58,7 +58,7 @@ can be easily implemented.
routines are common to all PowerPC processors.
./cpu/ppc4xx/bedbug_405.c
- IBM PPC405 specific debugger routines.
+ AMCC PPC405 specific debugger routines.
Bedbug support for the MPC860
diff --git a/doc/README.ebony b/doc/README.ebony
index 6e2a8115a4..8b030dbb54 100644
--- a/doc/README.ebony
+++ b/doc/README.ebony
@@ -1,9 +1,9 @@
- IBM Ebony Board
+ AMCC Ebony Board
Last Update: September 12, 2002
=======================================================================
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
Ebony evalutation board. See the README.ppc440 for additional
information.
diff --git a/doc/README.ml300 b/doc/README.ml300
index c9ef6e6c81..27c5b92783 100644
--- a/doc/README.ml300
+++ b/doc/README.ml300
@@ -5,7 +5,7 @@ Xilinx ML300 platform
---------------
The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
-integrated IBM PowerPC 405 core. The board is normally booted from
+integrated AMCC PowerPC 405 core. The board is normally booted from
System ACE CF. U-Boot is then run out of main memory.
An FPGA is a configurable and thus very flexible device. To
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index 08d6831fb6..f0cf782a8f 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -130,7 +130,7 @@ Updated 13-July-2004 Jon Loeliger
include/configs/MPC8540ADS.h
include/configs/MPC8560ADS.h
- CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
+ CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)
CONFIG_E500 BOOKE e500 family(Motorola)
CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives
CONFIG_MPC8540 MPC8540 specific
diff --git a/doc/README.ocotea b/doc/README.ocotea
index 403735d0f3..9ac3a184cb 100644
--- a/doc/README.ocotea
+++ b/doc/README.ocotea
@@ -1,9 +1,9 @@
- IBM Ocotea Board
+ AMCC Ocotea Board
Last Update: March 2, 2004
=======================================================================
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
Ocotea 440gx evalutation board. See the README.ppc440 for additional
information.
@@ -53,7 +53,7 @@ Special note about the Cicada CIS8201:
This has been done in the 440gx_enet.c file with a #ifdef/endif
pair.
-IBM does not store the EMAC ethernet addresses within their PIBS bootloader.
+AMCC does not store the EMAC ethernet addresses within their PIBS bootloader.
The addresses contained in the config header file are from my particular
board and you _*should*_ change them to reflect your board either in the
config file and/or in your environment variables. I found the addresses on
diff --git a/doc/README.ocotea-PIBS-to-U-Boot b/doc/README.ocotea-PIBS-to-U-Boot
index 0044aa0f91..25dd2a2378 100644
--- a/doc/README.ocotea-PIBS-to-U-Boot
+++ b/doc/README.ocotea-PIBS-to-U-Boot
@@ -75,8 +75,8 @@ powering the board you should see the following message:
U-Boot 1.1.3 (Apr 5 2005 - 22:59:57)
-IBM PowerPC 440 GX Rev. C
-Board: IBM 440GX Evaluation Board
+AMCC PowerPC 440 GX Rev. C
+Board: AMCC 440GX Evaluation Board
VCO: 1066 MHz
CPU: 533 MHz
PLB: 152 MHz
diff --git a/doc/README.ppc440 b/doc/README.ppc440
index 95d63fc508..08f34f589f 100644
--- a/doc/README.ppc440
+++ b/doc/README.ppc440
@@ -12,7 +12,7 @@ and enabled via the CONFIG_440 flag. It is largely based on the
405gp code. A sample board support implementation is contained
in the board/ebony directory.
-All testing was performed using the IBM Ebony board using both
+All testing was performed using the AMCC Ebony board using both
Rev B and Rev C silicon. However, since the Rev B. silicon has
extensive errata, support for Rev B. is minimal (it boots, and
features such as i2c, pci, tftpboot, etc. seem to work ok).
diff --git a/drivers/pc_keyb.c b/drivers/pc_keyb.c
index 07c7914fae..81d3e98934 100644
--- a/drivers/pc_keyb.c
+++ b/drivers/pc_keyb.c
@@ -193,7 +193,7 @@ static char * kbd_initialize(void)
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
- /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 6b131b6b08..a85e2b0055 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -694,7 +694,7 @@
#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
/*
- * IBM has further subdivided the standard PowerPC 16-bit version and
+ * AMCC has further subdivided the standard PowerPC 16-bit version and
* revision subfields of the PVR for the PowerPC 403s into the following:
*/
@@ -825,7 +825,7 @@
#define _MACH_gemini 0x00000200 /* Synergy Microsystems gemini board */
#define _MACH_classic 0x00000400 /* RPCG RPX-Classic 8xx board */
#define _MACH_oak 0x00000800 /* IBM "Oak" 403 eval. board */
-#define _MACH_walnut 0x00001000 /* IBM "Walnut" 405GP eval. board */
+#define _MACH_walnut 0x00001000 /* AMCC "Walnut" 405GP eval. board */
#define _MACH_8260 0x00002000 /* Generic 8260 */
#define _MACH_sandpoint 0x00004000 /* Motorola SPS Processor eval board */
#define _MACH_tqm860 0x00008000 /* TQM860/L */
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 4fcebe7a4f..091d06c268 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -79,7 +79,7 @@ typedef struct bd_info {
defined(CONFIG_405EP) || \
defined(CONFIG_440)
unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
+ unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
index 8d21b3f183..821efe5d48 100644
--- a/include/configs/ADCIOP.h
+++ b/include/configs/ADCIOP.h
@@ -184,7 +184,7 @@
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
-#define CFG_CACHELINE_SIZE 16 /* For IBM 401/403 CPUs */
+#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 2b389276fa..b53e85edae 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -263,7 +263,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index dfa62200e9..1cd0280e21 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -204,7 +204,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 8e3f34f98c..9841893899 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -264,7 +264,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index 21bc4410c1..e0262a8f67 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -171,7 +171,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 776fce5a98..ffe89cb78f 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -409,7 +409,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 44a4d25b0c..4a6a3f8515 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -212,7 +212,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index b159182eb5..d49020db76 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -256,7 +256,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index d1498eed3c..13dbe80daf 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -306,7 +306,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 29bd3da988..aaaafa94fd 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -278,7 +278,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 6673073c00..5cd9aba9e5 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -309,7 +309,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index efb27cc61f..a5bc773e17 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -265,7 +265,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index ae54683b98..93d49f3862 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -187,7 +187,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
index 5ff9b9ecfc..997e1baa9a 100644
--- a/include/configs/DASA_SIM.h
+++ b/include/configs/DASA_SIM.h
@@ -183,7 +183,7 @@
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
-#define CFG_CACHELINE_SIZE 16 /* For IBM 401/403 CPUs */
+#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 6bebaaa76e..2ae794dc26 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -232,7 +232,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index a2512981fd..5489a53936 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -223,7 +223,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index 1643dee4c9..c203aea924 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -323,7 +323,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index af96c7c70c..d9a7fb0fb8 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -321,7 +321,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 9ce6b3f891..e41e3712a3 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -359,7 +359,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 0fa5299187..eb627e881d 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -266,7 +266,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 2257ab24e5..060272cd18 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -269,7 +269,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405GPr CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 00a6e5d55d..7bbceb01bd 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -278,7 +278,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index cf6f00ef92..b96557148a 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -346,7 +346,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 6c2f17d587..db2147b481 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -257,7 +257,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 0x4000 /* For IBM 405GPr CPUs */
+#define CFG_DCACHE_SIZE 0x4000 /* For AMCC 405GPr CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index 6e54d71e55..d8805ea5a7 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -193,7 +193,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 4a629e0997..aa9d1ba735 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -213,7 +213,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 4cc67bce2b..2e7c505f99 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -211,7 +211,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 469d88f292..9d5c4f4d04 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -241,7 +241,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 9ac57151cb..9668fb0ce2 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -224,7 +224,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 7ee95df11f..54ecfa4c5e 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -330,7 +330,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 4548ca69ff..8bcab0b0f3 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -245,7 +245,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 2d89f3ffaf..7ca827fa4b 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -422,7 +422,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index d8370ed66d..b3ce3da822 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -314,7 +314,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 4aade443fb..64b6c537ee 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -237,7 +237,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index ae3f1f43ae..8dc623ea06 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -275,7 +275,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 2a78082fe2..2bd98b3af3 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -276,7 +276,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 5c9950f6f8..d92f81f78e 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -265,7 +265,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 2e0b1a45f5..9b32514867 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -24,7 +24,7 @@
* config for XPedite1000 from XES Inc.
* Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
* (C) Copyright 2003 Sandburst Corporation
- * board/config_EBONY.h - configuration for IBM 440GP Ref (Ebony)
+ * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
***********************************************************************/
#ifndef __CONFIG_H
@@ -253,7 +253,7 @@ extern void out32(unsigned int, unsigned long);
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 440GX CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 440GX CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 910de67efd..29d333490c 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -378,7 +378,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index bc5aaf8934..5feb63a789 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -308,7 +308,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EP CPU */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index ac1cead8d4..b4453b10ff 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -291,7 +291,7 @@
* Cache configuration
*
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 4e5dcfcf07..a00cafbe2e 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -291,7 +291,7 @@
* Cache configuration
*
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 1d4ea4e9b7..5f608be4c5 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -21,7 +21,7 @@
*/
/************************************************************************
- * board/config_EBONY.h - configuration for IBM 440GP Ref (Ebony)
+ * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
***********************************************************************/
#ifndef __CONFIG_H
@@ -272,7 +272,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index abad059ccf..6762cd61ea 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -147,7 +147,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
/*-----------------------------------------------------------------------
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 05a575bf63..5a27c02706 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -30,7 +30,7 @@
/************************************************************************
- * OCOTEA.h - configuration for IBM 440GX Ref (Ocotea)
+ * OCOTEA.h - configuration for AMCC 440GX Ref (Ocotea)
***********************************************************************/
#ifndef __CONFIG_H
@@ -297,7 +297,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index aeb5126828..725b4937b3 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -226,7 +226,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 3a8e61c087..d33956d385 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -267,7 +267,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index 081cff88be..f2cd053e37 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -291,7 +291,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 4ac930b42a..5c9b0e9c8d 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -292,7 +292,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/watchdog.h b/include/watchdog.h
index ac6ba8c091..9265be9737 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -84,7 +84,7 @@
void reset_5xx_watchdog(volatile immap_t *immr);
#endif
-/* IBM 4xx */
+/* AMCC 4xx */
#if defined(CONFIG_4xx) && !defined(__ASSEMBLY__)
void reset_4xx_watchdog(void);
#endif
--
GitLab