From 0549353a6ba5aa03420c0962b9072e9cf1fa49d9 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sun, 14 Jun 2009 20:58:46 +0200
Subject: [PATCH] mecp5123: fix build error
The mecp5123 board did not compile because the MSCAN Clock Control
Registers were missing; these got added, but as an array instead
of 4 individual registers. Adapt the code so it builds.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
---
board/esd/mecp5123/mecp5123.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
index 909b45869e..bff96db72a 100644
--- a/board/esd/mecp5123/mecp5123.c
+++ b/board/esd/mecp5123/mecp5123.c
@@ -79,6 +79,7 @@ int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr;
+ int i;
/*
* Initialize Local Window for NOR FLASH access
@@ -129,14 +130,10 @@ int board_early_init_f(void)
/*
* Configure MSCAN clocks
*/
- out_be32(&im->clk.m1ccr, 0x00300000);
- out_be32(&im->clk.m2ccr, 0x00300000);
- out_be32(&im->clk.m3ccr, 0x00300000);
- out_be32(&im->clk.m4ccr, 0x00300000);
- out_be32(&im->clk.m1ccr, 0x00310000);
- out_be32(&im->clk.m2ccr, 0x00310000);
- out_be32(&im->clk.m3ccr, 0x00310000);
- out_be32(&im->clk.m4ccr, 0x00310000);
+ for (i=0; i<4; ++i) {
+ out_be32(&im->clk.msccr[i], 0x00300000);
+ out_be32(&im->clk.msccr[i], 0x00310000);
+ }
/*
* Configure GPIO's
--
GitLab