GitLab

Host driver initiated recovery will cause issues if FW is still
trying to access host buffers. Hence add the support that recovery
can be initiated by FW to make sure FW activity has stopped.

Change-Id: I5f00fe9b969a7d2ce39e31df3dafa30d35078de5
CRs-fixed: 851449

Add support for self recovery when SME command stuck happens.
Add knob to control the self recovery support and dump the
recovery stats with ioctl command.

Change-Id: I2f60d7ede88df939b9cb48d52f0d7e8c0bf79fcf
CRs-Fixed: 700189

Change-Id: Id7961511751cf0cdef6630f69dc19c838b687d8a
CRs-Fixed: 710831

Add some debug log between 2 Roam sub state change process.
Check why the normal Roam sub state change process is not
called.

Change-Id: Iac0f9f86e7dccfccda97291810e32205f705d34c
CRs-Fixed: 935062

Change-Id: I146967bd32e300da03c6f2b3d1318b2a8c76b2d5
CRs-Fixed: 710831

Host send WoW pulse setting information to firmware and allow
firmware to use this pulse to wake host

Change-Id: I632b3e85a8e113b8b8d4c927e822dce53f1b6727
CRs-Fixed: 924672

add WMI cmd WMI_WOW_HOSTWAKEUP_PIN_PATTERN_CONFIG_CMDID

Change-Id: If9d15429b8171b402374fa999db91affe83be753
CRs-Fixed: 865207

add WMI_PEER_ASSOC_CONF_EVENT msg

Change-Id: Ie182af029e480a91810bcd333c72466dab79074d
CRs-Fixed: 865207

Add extra NS tuples for ARP NS offload command.

Change-Id: I15be1b645f6e17e1056999f2b84a0a4cc9d582c1
CRs-Fixed: 865207

Add a new threshold for TDLS teardown notification interval
teardown_notification_ms.

CRs-Fixed: 865207
Change-Id: I06fbe0515015d74503b1ec04aebee503ebdeec4b

Add RC4 and HMAC info to extended-WOW parameters message

CRs-Fixed: 865207
Change-Id: I872a1e1e8e924bb7118088277204b3101d4292f5

Add WMI_MAWC defs.

CRs-Fixed: 865207
Change-Id: I0aa757006a20d613f1ae54b5006109562db52849

Add WMI_SERVICE_READY_EXT message def.

CRs-Fixed: 865207
Change-Id: I9b60836c3ed79cc7fdf4bb85da362f6dab2fdc8e

Add WMI_VDEV_PARAM_MCC_BROADCAST_PROBE_ENABLE

CRs-Fixed: 865207
Change-Id: Ibc4d57b710e889b6ccd1f4b41d953921dceb1be1

Add Channel prediction information.
Add module id & debug id.

CRs-Fixed: 865207
Change-Id: Ibc81f2c61580087168b6229df95d0a6ca54f6f58

Add WMI_LRO_CONFIG_CMDID message.
Add WOW WMI Reason code for handling management frames in wow mode.

CRs-Fixed: 865207
Change-Id: Ia5142b94ee5a6280546f2e9ea672e75f19bdb7d4

Add wake reason for packet filter match found

Change-Id: I1a52fe4fcbf68cce260e60ac1698abe09b0d7bd0
CRs-Fixed: 865207

Change-Id: I0a847ab31594d7acfacbc95008cf497325f1b84d
CRs-Fixed: 710831

Correct the return value to iwpriv, make sure that iwpriv can display
the expected result.

Change-Id: Iaad6595dd81f2095a5b2d0d60a27b0566751a3a3
CRs-Fixed: 927105

Change-Id: Ia558fdff3ad67323eca48df9aac427729dc87d12
CRs-Fixed: 710831

1.Use iw tool to let dut connect to remote ap, dut is working on wlan0.
2.At same time, use hostapd to start sap also on interface wlan0.

In item1, before connect to ap, dut will do an internal scan to search ap,
if scan result matched configured ap profile, dut trys to connect to ap.

In item2, when starting sap, found it's sta mode it will try to disconnect
dut with remote ap and close sta session.

  #1 If ap start action happened in item1's scan period, trying disconnecting
  won't take effect as currently sta has not yet connected with remote ap.
  So after item1's scan finished, dut continues to do connection.

  #2 During closing sta session, sme issued eSmeCommandDelStaSession, as
  currently sta is doing connection, so session is in started status, this
  cause closure failed, so there is no chance to remove cmd in smeCmdActiveList.
  While cmd pending in smeCmdActiveList for 120s, driver issued crash.

The solution is in item1 after scan complete to check whether it's
needed to start following connection. If stop action has been issued
during scan period, then don't do the connection.

Change-Id: If632e21cb13277fba371ff1bf8df97febf856d09
CRs-Fixed: 923375

Change-Id: I377dafb4b7a7c25f1d61c88bd992630c2163e6ab
CRs-Fixed: 710831

Host send request message to firmware and get all stations' RSSI
information when hostapd is started.

Change-Id: I3c6795dfb29e769fc4d1cd1b2c60eeb95f6eadf5
CRs-Fixed: 912576

Enable compilation marco of udp response offload feature
for branch LNX.LEH.4.2.2.2

Change-Id: I8c3d67edd6656c4fe28ff9cf69ace316853861c7
CRs-Fixed: 899737

Change-Id: I5ff9f9e6a5d57fcd4cfbb1db8c48adf6063e2b28
CRs-Fixed: 710831

Host send udp response offload information to firmware
and allow firmware to respond the specific udp packet when
host is in standby status.

Change-Id: Ic702b67477d93ed94af14f5653820c0c5b6c54e3
CRs-Fixed: 899737

This change is to add the 2G EBT type for PPS

Change-Id: Iacf5b8f2b3b1782ef926f1b7faeceebf3c1d9303
CRs-Fixed: 865207

This change is to remove the temporary aliases for deprecated
WMI_DBS_CONC_SCAN macro

Change-Id: Ibec54073d24e7799a00f19db0d258a7c17f5daf8
CRs-Fixed: 865207

This change is to revert CL 1376450 - add RSSI information to
WMI vdev stopped event.

Change-Id: I44a22a0e7435030c55b0b9fb9f2ee5cff9e696dd
CRs-Fixed: 865207

Do not init peer ref_cnt in wma_delete_all_ap_remote_peers
function because peer should be removed when driver
receives unmap handler from FW.

Change-Id: Ibcdb03d001e257e64924aef1ab5cb56287d12199
CRs-FIXED: 713265

Change-Id: I23ad727cde29e3f3b2b67faf31d8aa556bb0f338
CRs-Fixed: 710831

In some cases when calibration is going on in FW VDEV start
response may take more ~3 seconds so increase the VDEV start
response timeout value to 3 seconds.

Change-Id: I22f1b8b675b09d48054b34179389651dec63caf0
CRs-Fixed: 700323

Change-Id: Ie42923cd476f6f4ea49b13e42b200dfc69273812
CRs-Fixed: 710831

If disconnect command is queued in SME and same time the connect
is in progress which failed eventualy, driver will not call the
disconnect handler leading to the wait for disconnect handler
timeout. This timeout will leave the hdd state as disconneting
and thus the next connect commands will always try to disconnect
thinking that disconnect is still in progress leading to connect
return with failure.
With this fix hdd will set the hdd state from disconnecting to
not connected even if disconnect timeout.

Change-Id: I349bfe129d476894bc60615477818245cb131a9b
CRs-Fixed: 832623

The analysis of this issue is, if the function sme_RoamDisconnect returns
eHAL_STATUS_CMD_NOT_QUEUED (which means command not queued because there
is no connection). At this point state m/c is set to Disconnecting and
we are starting the disconnect timer which timesout and returns -EETIMEDOUT
and hence connState is not set to eConnectionState_NotConnected.

When the connection state "Connecting", it can move to either "Connected"
or "Disconnected". Here since there is a connection failure, we should be
moving to "Disconnected". Upon connection failure and hdd disconnect in
progress, we don't move to "Not connected" state and state is stuck at
"Connection in progress". Hence scan failure.

To fix this issue, if sme_RoamDisconnect returns eHAL_STATUS_CMD_NOT_QUEUED
move the state to "Not connected"

Change-Id: I174eda7eec679f5861946d04c78ad1e76a17975e
CRs-Fixed: 728064

During connection if AP is not found in scan list, driver tries
to scan for the ssid (eCsrScanForSsid) and if AP is found,
the connect cmd is started.

During this scan if Disconnect comes from supplicant, as there is
no ongoing connect command and sme is not in connected state, the
disconnect command is dropped in SME and hdd is indicated success.
This leads to HDD waiting on the event disconnect_comp_var and
connState to eConnectionState_Disconnecting.

After this if supplicant send connect and as HDD is in
disconnecting state it will again wait for disconnect_comp_var
and return failure after timeout and this will continue and user
will not able to connect.

If disconnect is received during eCsrScanForSsid abort/dequeue
the eCsrScanForSsid in SME and in HDD set the connState to
eConnectionState_NotConnected and set disconnect_comp_var
complete.

Change-Id: I1da89065e1e59bcf08806179f85e3d9d00d5828e
CRs-Fixed: 689890

When sap respond mdns request, the txt content should be segment
by '/', otherwise all content will be sent in one segment.

Change-Id: I64ab0062ced3fd028ceb0da7a3a2cb737bf726cb
CRs-Fixed: 903983

Change-Id: Ib840822e581a6495c99b65c1531de3a83ef09a32
CRs-Fixed: 710831

In sap auth offload enabled case, if psk isn't 4 bytes aligned,
tlv check of WMI_SAP_OFL_ENABLE_CMDID will fail.

Change-Id: Icd6c437f8d7705262e8853b9c348f950b04790b5
CRs-Fixed: 903134

Change-Id: Ie9551936a3ec0d2ce10a13b3188f09e0f9ccce9e
CRs-Fixed: 710831