Commit aa8d4091 authored by David Mondou's avatar David Mondou
Browse files

Fix README.rst

parent 035bc98e
.. role:: bash(code)
:language: bash
This repository holds the binaries and scripts files necessary to manufacture a Vesta Gateway using a Linux operating system.
The source files and instructions for this tool were original taken from this thread:
......@@ -6,8 +9,8 @@
The binaries for this tool were compiled on a machine running Ubuntu 14.04.
In order to use this tool you must have the required packages installed. Run the following commands to install these packages:
- :bash sudo apt-get install libusb-1.0-0-dev
- :bash sudo apt-get install libsgutils2-dev
- :bash:`sudo apt-get install libusb-1.0-0-dev`
- :bash:`sudo apt-get install libsgutils2-dev`
In order to use this tool you will also need to populate the files folder with the appropriate u-boot, kernel, dtb and rootfs. These files can be created using the instructions here:
......@@ -29,8 +32,8 @@ For the Vesta 300 developer image, the files folder should contain the following
* zImage-vesta-300.dtb
In order to put the Vesta Gateway in USB serial down loader mode, which allows updating over USB, you will need to hold down the user button while supplying power to the Gateway. Then start the tool by issuing the following command:
- :bash sudo ./board-flash board-type image-name
- :bash:`sudo ./board-flash board-type image-name`
For example to manufacture a Vesta-300 Gateway with the developer image you would issue the following:
- :bash sudo ./board-flash 300 developer
- :bash:`sudo ./board-flash 300 developer`
\ No newline at end of file
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment