Commit 98631b56 authored by Carles Cufi's avatar Carles Cufi
Browse files

Doc format fix

parent 7f112b7f
......@@ -71,7 +71,7 @@ The serial port will appear as `/dev/ttyACMx`. By default the port is not access
The serial port will appear as `/dev/tty.usbmodemXXXX`.
** IMPORTANT NOTE **
**IMPORTANT NOTE**
On macOS (OS X) there is a known issue with the Segger J-Link firmware (that runs on the Debug probe on the board) related to USB packet sizes.
There are two ways to solve this issue:
......@@ -79,9 +79,10 @@ There are two ways to solve this issue:
1. Use the Segger firmware, but disable the Mass Storage Device (MSD) feature. Instructions are available [here](https://wiki.segger.com/index.php?title=J-Link-OB_SAM3U).
2. Replace the firmware on the Debug probe with the mbed DAPLink firmware:
..1. Enter bootloader mode by powering off the nRF5 Development Kit and then pressing IF BOOT/RESET while you power on the kit.
..2. Drag and drop the [nrf5x_osx_fix.bin](https://github.com/NordicSemiconductor/pc-ble-driver/blob/master/tools/nrf5x_osx_fix.bin) file into the BOOTLOADER mass storage device.
If you want to revert back to the Segger firmware you will have to download the it from [this location](http://www.nordicsemi.com/eng/nordic/Products/nRF51-DK/nRF5x-OB-JLink-IF/52276).
- Enter bootloader mode by powering off the nRF5 Development Kit and then pressing IF BOOT/RESET while you power on the kit.
- Drag and drop the [nrf5x_osx_fix.bin](https://github.com/NordicSemiconductor/pc-ble-driver/blob/master/tools/nrf5x_osx_fix.bin) file into the BOOTLOADER mass storage device.
If you want to revert back to the Segger firmware you will have to download the it from [this location](http://www.nordicsemi.com/eng/nordic/Products/nRF51-DK/nRF5x-OB-JLink-IF/52276)
## Building Boost
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment